SIKA Primer-215 - Primer for porous substrates and plastic - 250ml

SIKA Primer-215 - Primer for porous substrates and plastic - 250ml

pics/Sika/sika_primer-215.jpg
  • pics/Sika/sika_primer-215.jpg
  • pics/Sika/sika__logo.jpg

256.68 42.78 incl. VAT (35.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 6 pieces

Manufacturer: Sika

Country of origin: CH/0039

Customs tariff number:

Weight per piece: 300 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

SIKA Primer-215 - Primer for Porous Substrates and Plastics - 250ml

Description:

Sika® Primer-215 is a transparent, slightly yellowish, low-viscosity, moisture-reactive primer for the pre-treatment of various plastics, wood, and other porous substrates that will be bonded with Sikaflex® products.
Sika® Primer-215 is produced according to the quality assurance system ISO 9001 / 14001 and the Responsible Care program.

Applications:

Sika® Primer-215 is a pre-treatment agent for the following substrates: Plastics such as GRP (UP or EP resins), PVC, ABS, and wood. Due to the variety of plastic formulations, preliminary tests are necessary. Not suitable for stress-crack-prone plastics like PMMA/PC.
This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be conducted with original materials under the respective conditions.

Application:

Substrates must be clean, dry, free of dust and grease.
Adhesion can be improved by additional pre-treatment steps such as sanding, cleaning, and activation.
Wipe the bonding surfaces with Sika® Activator-205 and allow to flash off. Apply Sika® Primer-215 evenly and thinly but opaquely using a brush, felt, or foam applicator.
Apply the primer only once.
Ensure that the layer is even and opaque.
The ideal application temperature is 15 °C – 25 °C.
Consumption and application method depend on the substrates and manufacturing processes.
After use, immediately close the container tightly again.

Important Note:

Sika® Primer-215 reacts with moisture. To maintain the quality of the primer, close the can immediately after each use with the inner plastic lid. After the pre-treatment is complete, close the can with the screw cap. After the first opening, the primer should be used within approximately one month if used regularly.
If the can is opened infrequently, the primer should be used within 2 months.
Do not use primer that has gelled, is not homogeneous, or shows increased viscosity.
Do not dilute or mix the primer with other substances.


   


Hazard Statements (CLP)
 

Signal word: Danger.
Hazard Statements (H-Sentences)
  • H225: Highly flammable liquid and vapour.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
Additional Hazard Statements
  • EUH066: Repeated exposure may cause dry or cracked skin.
Precautionary Statements (P-Sentences)
Prevention:
  • P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
  • P233: Keep container tightly closed.
  • P261: Avoid breathing mist or vapour.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response:
  • P303 + P361 + P353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
  • P370 + P378: In case of fire: Use dry sand, powder, or alcohol-resistant foam to extinguish.


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Sika Deutschland GmbH, Kornwestheimer Str. 103-107, 70439 Stuttgart, GERMANY, +49 711 8009-0, [email protected], www.sika.com

No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- 7612894884968 1428

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 166 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us