SIKA Aktivator 100, 250ml Bottle

Specifications:

• Chemical base: solvent based primer
• Color: colorless, clear
• Density (DIN 51757 / ISO 2811-1): approximately 0.7 kg / l
• Flash point (DIN 51755 / ISO 13736): -4° C
• Application temperature: + 5° C to + 40° C
• Application method: wipe with a lint-free paper towel
• Consumption: 30-60 ml / m2

Flash-off:

• Temperature above 15° C: 10 min
• Temperature below 15° C: 30 min
• Maximum: 24 hours
• Storage: Store at below 25° C, cool and dry
• Durability: 12 months

Description:

• Coating Sika® Activator is a special cleaning and activation solution for the pretreatment of coated and painted surfaces.
• Sika®Coating activator is produced according to the quality assurance system ISO 9001/14001 and the responsible care program.

Scope:
Coating Sika® Activator is used to clean and improve adhesion bonding applications on coatings:

• Powder Coating
• Stoving
• Coil coating sheets
• Special finish
• Coating Sika® Activator may not be used for primerless bonding of glass and ceramics.
• This product is only suitable for experienced users.
• In order to ensure adhesion and material compatibility, preliminary tests must be carried out with the original materials under the respective conditions.

Processing:

• The adhesive surfaces with a clean, lint-free cloth moistened with Sika® Activator Coating paper fleece wipe.
• Coating Sika® activator thin, apply in a single operation.
• Remove excess quantities immediately with a dry, clean lint-free paper towel.
• The ideal temperature is 15 ° C - 25 ° C.
• The consumption depends on the substrates and manufacturing processes.
• Immediately close the container tightly after use