Sika Aktivator-205 Cleaning and activation 250 ml

• Sika Activator 205 is an alcoholic solution with active substance liable to Akti-vation of bonding surfaces before bonding and sealing with Sikaflex products.
• Sika Activator 205 9001/14 001 and the Responsible Care program fro-submitted after qualifying assurance system ISO.
• BMW OEM: 83190030155

Scope

• Activation of the following non-porous sub-reasons: metals, plastics, enameled glass (ceramic), coated substrates.
• This product is the applica-suited to advanced. In order to ensure adhesion and material compatibility, preliminary tests with the original materials under the respective conditions must be routed through.

Processing

• Wipe the contact area with a clean cloth dampened with Sika Activator 205 paper-fleece. Change after each wipe paper towel.
• If the substrates to be bonded adhesively not after 2 hours, must be re-primed with Sika Activator 205 (max 2 times.).
• The ideal processing and surface temperature is + 15°C to + 25°C.
• The consumption depends on the substrates and manufacturing processes.
• Containers immediately after use tightly again.
• In case of continuous exposure to air humidity-activity Sika Activator 205 is cloudy and therefore inactive. The milky product must not be used.
• The evaporation time is of the order-dependent ambient conditions and temperature.

• Chemical Type: solvent-based adhesive
• Color: colorless, clear
• Density (DIN 51 757 / ISO 2811-1): 0.8 kg / l
• Flash point (DIN 51 755 / ISO 13736): + 12°C
• Working temperature: + 5°C to + 40°C
• Application method: wipe with a lint-free paper towel
• Consumption: about 30 - 60 ml / m²
• Flash-off time: 10 min
• Storage conditions: less than + 25°C sealed in a cool and dry
• Shelf life: 12 months