Markal Ball Point Metal Marker Stylmark Set 3 colors - Ball Point 3 mm

For Marking all kind of surfaces, even the greasiest and the roughest one thanks to its head and ball in Steel.
The paint has a strong adhesion power, a strong resistance to weather inclemency, to chemical aggressions, to sea water and is UV resistant.
The paint is indelible after drying.
Marking possible under Water
The paint of the Stylmark marker can only be erased with a special solvents or abrasive tools.
The Stylmark ball point metal marker is used for marking of mechanical parts, woods, tires, glass, saw-mills, etc...
Resist to temperature up to 200°C

Application

• Hold the marker straight during marking.
• Hold the ball point metal marker against the surface to mark and press at the same time the marker.
• Do not roll the marker. Risk of fissures.

Volume: 50ml

PLEASE NOTE: FOR CERTAIN COLOURS LIKE BLACK, PINK, LILA, GREY, BROWN IN 2 AND 6 MM, THE DELIVERY TIME CAN LAST FROM 5 TO 7 DAYS.

You can find here below the material safety data sheet of Stylmark hier to download
MSDS STYLMARK TO DOWNLOAD AT THE BOTTOM OF THE PAGE

Etiquetage selon le règlement (CE) n° 1272/2008 Le produit est classifié et étiqueté selon le règlement CLP.
Signal word Danger

• Hazard-determining components for labeling:
• n-butyl acetate

• H226 Flammable liquid and vapor.
• H336 May cause drowsiness or dizziness.

• P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• P241 Use explosion-proof electrical equipment/ventilation systems/lighting.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P303+P361+P353 IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.
• P405 Store locked up.
• P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
• Labelling of packaging with a content of not more than 125 ml

Hazard pictograms