3M DP 490 Epoxy Structural Adhesive 50ml

3M ™ Scotch-Weld ™ DP 490 is a tough-elastic and thixotropic 2-component epoxy-based construction adhesive for the EPX system. The product with a very long processing time (> 90 minutes) achieves very high peel force, high shear strengths and is characterized by its high temperature resistance. Scotch-Weld DP 490 was developed for the bonding of metals such as aluminum, steel and brass, plastics such as ABS, PA, PC, rigid PVC etc. as well as fiber composites.

Product benefits

• Very long processing time (greater than 90 minutes)
• Thixotrope: Does not flow on vertical surfaces
• High temperature resistance up to 120 ° C
• Particularly powerful product for the highest demands
• Thixotropic: no bleeding of the adhesive
• High temperature resistance allows greater stress on the bond

Characteristics

• Processing time of more than 90 minutes
• viscoplastic
• High shear strength
• Good peeling force
• Good impact resistance

Hazard Warnings (CLP) / Part A

Hazard Statements (H-phrases)

• H314: Causes severe skin burns and eye damage.
• H317: May cause an allergic skin reaction.
• H336: May cause drowsiness or dizziness.
• H410: Very toxic to aquatic life with long-lasting effects.

Safety Statements (P-phrases)

Prevention:

• P260A: Do not breathe vapour.
• P273: Avoid release to the environment.
• P280D: Wear protective gloves/protective clothing/eye protection/face protection.

Response:

• P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310: Immediately call a POISON CENTER or doctor.

Additional Information

• EUH212: Warning! Dangerous dust inhalable into the lungs can be generated during use. Do not breathe dust.
• 2% of the mixture consists of components of unknown acute dermal toxicity.
• 10% of the components have unknown aquatic toxicity.

Other Hazards

• Individuals already sensitized to amines may experience cross-sensitization with other amines.
• This material contains no substances that are assessed to be PBT or vPvB.

Hazard Warnings (CLP) / Part B

Hazard Statements (H-phrases)

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H317: May cause an allergic skin reaction.
• H411: Toxic to aquatic life with long-lasting effects.

Safety Statements (P-phrases)

Prevention:

• P273: Avoid release to the environment.
• P280E: Wear protective gloves.

Response:

• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
• P391: Collect spillage.

Additional Information

• EUH212: Warning! Dangerous dust inhalable into the lungs can be generated during use. Do not breathe dust.
• 16% of the mixture consists of components of unknown acute oral toxicity.
• 22% of the components have unknown aquatic toxicity.

Other Hazards

• None known.
• This material contains no substances that are assessed to be PBT or vPvB.

3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds