3M 5925 P2R gas filter EN143:2000 P2 R

3M™ Particulate Filter P2 R, 5925

The 3M™ 5925 is a soft, lightweight filter pack, which is designed for use with the 6000 series cartridges and the 3M 501 retainer. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of P2, it can protect you against solid, liquid particles and gases with effective filtration efficiency. The bayonet fitting types allows each filter to be clicked in place for ease.

Features and Benefits

3M™ Particulate Filter offering P2 R protection against solid and liquid particles
Designed for use in combination with 3M™ Gas and Vapour Filters 6000 Series using the 3M™ Filter Retainer 501 or used separately using a 3M™ 603 Filter Platform and a 3M™ Filter Retainer 501
Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system
Bayonet fitting allows filters to be clicked into place for ease of fitting

Applications

Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as:
 

• A- Organic vapours with a boiling point more than 65°C
• B- Inorganic vapours
• E- Acid gases
• K- Ammonia and ammonia derivatives
• AX- Organic vapours with a boiling point less than 65°C

Half-mask or full-mask respirators?

Depending on the health and safety requirements of your workplace or the demands of your application, you may need to choose between a half mask or full mask respiratory. Half mask respirators cover only the nose and mouth, while full masks cover the entire face. While both masks may have the same grade of filter, a full face mask has the benefit of sealing around the whole face, creating a more secure seal. Full face masks also have the advantage of protecting the eyes from vapours or splashing. As such, the full face mask option is often a better choice for potentially more hazardous conditions.

However, a half-mask might be a more cost-effective option if extra protection isn't needed, or might be more suitable for use in combination with specialized headgear.

Correct use of respirators

When it comes to respiratory protection, the correct fitting and testing of your respirator is just as important as selecting the correct respiratory protective equipment for your working conditions. Be sure to follow all pertinent instructions and that health and safety best practice is adhered to at all times. Always be sure to use the correct filters for your environment, and make sure the replacement filters are changed as regularly as is recommended.