Tempilaq advanced 2 Ounce - Temperature indicating liquids 59ml

Optimal for cold and/or smooth surfaces, Tempilaq G® Indicating Liquid is a quick, easy and cost-effective method to verify the achievement of a specific temperature on a wide range of surfaces under dynamic conditions.

• 43 different temperature ratings from 175°F to 1900°F (79°C to 1038°C)
• Reliably accurate – melts within ±1 percent of rated temperature
• Easy to apply quick-drying fluid
• Non-flammable for maximum safety and unrestricted shipment
• Standard packaging:  2 oz bottles (about 6cl)
• Certification available upon request
• Numbered production lot for traceability

Quick application and accurate results. When applied to a surface, Tempilaq quickly dries and forms a dull and opaque film. The film liquefies when heat is applied to that surface and the rated temperature is reached. As the surface cools, the liquefied Tempilaq re-solidifies to leave a distinctly different mark, confirming that the target temperature has indeed been achieved.

Applications:

• Thermal mapping on multiple surfaces
• Calibrating brake calipers
• Wave soldering PC boards
• Dielectric heat sealing
• Post-forming plastic laminate
• Annealing polished metal surfaces
• Calculating glass temperatures at various heating stages
• Calibrating industrial ovens

Classification of the substance or mixture
GHS classification
Acute toxicity (inhalation:dust,mist) Category 4 : H332 Harmful if inhaled.
Serious eye damage/eye irritation, Category 2A : H319 Causes serious eye irritation.
Reproductive toxicity, Category 2 : H361 Suspected of damaging fertility or the unborn child.
Hazardous to the aquatic environment — Chronic Hazard, Category 3 : H412 Harmful to aquatic life with long lasting effects
GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS) :

Signal word (GHS) : Warning
Hazard statements (GHS) : H319 - Causes serious eye irritation.
H332 - Harmful if inhaled.
H361 - Suspected of damaging fertility or the unborn child.
H412 - Harmful to aquatic life with long lasting effects.
Precautionary statements (GHS) : P201 - Obtain special instructions before use.
P202 - Do not handle until all safety precautions have been read and understood.
P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 - Wash hands, forearms and face thoroughly after handling.
P271 - Use only outdoors or in a well-ventilated area.
P273 - Avoid release to the environment.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 - If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 - If exposed or concerned: Get medical advice/attention.
P312 - Call a poison center/doctor if you feel unwell
P337+P313 - If eye irritation persists: Get medical advice/attention.
P405 - Store locked up.
P501 - Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

  

 

Information on product safety (Manufacturer, Contact)

LA-CO Industries Europe S.A.S., 465 All. des Combes, 01150 Blyes, FRANCE, +33 4 74 46 23 23, [email protected]. www.lacoindustries.com