LUSIN PROTECT G11 Anticorrosive agent / Mould protector 400ml spray

Lusin® Protect G 11 is a grease-like mould protectant (anticorrosion agent) based on refined hydrocarbon oils and special additives for temporary protection of all kinds of metal surfaces. The elastic, polymolecular film penetrates into tiny cracks and corners.

Application

• Protect moulds and dies dedicated for processing thermoplastic resins against corrosion

Characteristics

• Stable, transparent film
• Resistant to low and high temperatures
• Repels moisture
• Ensures temporary protection against corrosion
• Free of silicone
• Does not drip
• Size: 400 ml
• Packaging type: Aerosol spray

Typical Properties

Notes

• Lusin® Protect G 11 only shows maximum protecting (anticorrosion) properties when applied on dry and clean metal surfaces. For cleaning it is recommended to use Lusin® MC1718 or Lusin® Clean L 23 F as a mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 52 F  as a degreasing agent.
  Optimal film generation is only ensured if Lusin® Protect G 11 is applied in several thin layers taking particular care to cover edges and undercuts.
• Lusin® Protect G 11 can either be removed by the use of degreasers like Lusin® Clean L 11 or Lusin® Clean L 52 F or by producing parts, thus transferring the mould protectant to the produced parts.
• In terms of subsequent treatment of the produced parts, such as lacquering, printing or gluing, preliminary tests are recommended.

Hazard Warnings (CLP)

Hazard Statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H412: Harmful to aquatic life with long-lasting effects.

Safety Statements (P-phrases)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P273: Avoid release to the environment.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Other Hazards

• This substance/mixture does not contain components classified as persistent, bioaccumulative, and toxic (PBT) or very persistent and very bioaccumulative (vPvB).
• This substance/mixture does not contain components with endocrine-disrupting properties according to REACH Article 57(f).

Chem-Trend (Deutschland) GmbH, Ganghoferstr. 47, 82216 Maisach-Gernlinden, GERMANY, +49 8142 417-0, [email protected], www.chemtrend.com