WD-40 Specialist Multi-Purpose Cutting Oil 400ml Smart Straw spray

WD-40 Specialist® 400ml Multi-Purpose Cutting Oil

Multi-Purpose Cutting Oil is designed to improve the performance and extend the life of your cutting and drilling equipment. You can use it on either stainless steel or titanium components.
It prevents pitting and metal seizures, eases mechanical processing of metals, and reduces heat and damage caused by friction. 

Characteristics

• Specially formulated to maximise the life of cutting and drilling equipment
• Lubricates to reduce tip welding
• Works under extreme pressure
• Improves machine finishes
• Prevents pitting and metal seizures
• Improves performance and extends the life of tools

Field of application

• Hand cutting machinery
• Power cutting equipment
• Hand drilling
• Thread cutting
• Power drills

Advantages

With the Smart Straw applicator, you’ve got two ways to spray; use the flip up straw for hard to reach areas, such as inside chains, locks or rollers, then flip it down to use the wide angle spray eye for area coverage on surfaces. Whichever way you need to spray, you can rely on the clever 360° valve to work efficiently at every angle, even upside down.

Technical specifications

• Appearance: Brown liquid
• Specific Gravity: 0.94 - 0.97 at 20°C
• Flammability, as supplied: Extremely flammable, flash point below -20°C
• Composition Data, as supplied: A solution of a naphthenic lubricant, chlorinated paraffin, anti-wear and extreme pressure additives in a butane/isobutane/propane propellant
• Service Temperature [Continuous]: Designed for use at ambient temperatures
• Kinematic Viscosity at 40°C: 22 mm2/s
• Active Sulphur: 0.87 % (AS TM D-1662)
• 4-ball Wear Test: 0.59 mm (AS TM D-4172) 

---

Hazard Warnings (CLP)

Signal word: Danger

Hazard Statements (H-phrases)

• H362: May cause harm to breast-fed children.
• H222: Extremely flammable aerosol.
• H410: Very toxic to aquatic life with long-lasting effects.
• H229: Pressurised container: May burst if heated.

Safety Statements (P-phrases)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P201: Obtain special instructions before use.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P260: Do not breathe vapour or aerosol.
• P263: Avoid contact during pregnancy and while nursing.
• P270: Do not eat, drink or smoke when using this product.
• P273: Avoid release to the environment.

Response:

• P308+P313: IF exposed or concerned: Get medical advice/attention.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

Disposal:

• P501: Dispose of contents/container to an approved waste disposal facility.

Additional Labelling (EUH-phrases)

• EUH066: Repeated exposure may cause skin dryness or cracking.

Other Hazards

• Formation of explosive mixtures possible without adequate ventilation.
• The mixture contains a vPvB substance (very persistent, very bioaccumulative).
• The mixture contains a PBT substance (persistent, bioaccumulative, toxic).
• The mixture contains no substances with endocrine-disrupting properties (< 0.1%).

 

Information on product safety (Manufacturer, Contact)

WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, [email protected], www.wd40.de