Klüber HOTEMP 2000 High-temperature lubricating oil spray 400ml

HOTEMP 2000 Spray

• HOTEMP 2000 Spray is an advanced, synthetic hightemperature lubricant in aerosol form for friction points that are normally lubricated manually.
• Following evaporation of the solvent, HOTEMP 2000 Spray forms an even, thin and highly adhesive lubricant film.
• Content: Aerosol can 400 ml

Benefits for your application:

• High thermal stability
• Good adhesion to friction points, long-term lubricating effect
• Good creeping and penetration, hence lower consumption
• Resistant to centrifuging, therefore reduced risk of contamination
• Insoluble in water, good wash-off resistance

Application:

• HOTEMP 2000 Spray is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.
• HOTEMP 2000 Spray is also an ideal lubricant for motorcycle chains (also O-ring chains). It is not washed off and penetrates well into chain joints and friction points.
• HOTEMP 2000 Spray forms a durable, load-carrying lubricant film even at high temperatures. For the ideal service temperature, please refer to the product data.

Application notes:

• Ensure sufficient ventilation when processing HOTEMP 2000 Spray as explosive mixtures may form.
• Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material safety data sheet and on can label.
• When applied, HOTEMP 2000 Spray forms a highly adhesive lubricant film that resists centrifuging and water wash-off. It is economical in use thanks to its adjustable nozzle. The spray jet can be changed from vertical to horizontal to ensure application of the right quantity at the desired lubrication point.
• Sprays should not be exposed to direct sunlight and temperatures above 50 °C.

Product data: