KD-CHECK RDP-1 Red dye penetrant for crack detection 500ml spray

KD-CHECK RDP-1 Red dye penetrant for crack detection 500ml spray

pics/karl-deutsch/EIS copyright/RDP-1/kd-check-rdp-1-red-dye-penetrant-for-crack-detection-500ml-spray-001.jpg
  • pics/karl-deutsch/EIS copyright/RDP-1/kd-check-rdp-1-red-dye-penetrant-for-crack-detection-500ml-spray-001.jpg
  • pics/karl-deutsch/EIS copyright/RDP-1/kd-check-rdp-1-red-dye-penetrant-for-crack-detection-500ml-spray-003.jpg
  • pics/karl-deutsch/EIS copyright/RDP-1/kd-check-rdp-1-red-dye-penetrant-for-crack-detection-500ml-spray-004.jpg
  • pics/karl-deutsch/kd-check-rot-weiss-eindringpruefung-anwendung.jpg
  • pics/karl-deutsch/kd-check-eindringpruefung-anwendung.jpg
  • pics/karl-deutsch/karl-deutsch-logo.jpg

18.98 18.98 incl. VAT (15.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Karl Deutsch

Country of origin: DE/0004

Customs tariff number: 38249992

Weight per piece: 500 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Karl Deutsch KD-CHECK RDP-1 red crack detection spray allows non-destructive testing for surface cracks and pores, using the dye penetration test method.

Advantages
  • Efficient testing with minimum effort: Only one spray of penetrant, cleaner (KD-Check PR-1) and developer (KD-Check SD-1) are required for successful testing.
  • Reduced consumption: Low viscosity and optimum dripping properties lead to reduced test agent consumption
  • Easy evaluation: Evaluation is carried out in normal daylight or under daylight lamps
  • High test reliability: Strong contrast formation, sample tested according to DIN EN ISO 3452-2 and 3452-6, approved according to AREVA NP TLV 9017
Application
  • Particularly suitable for construction sites, repairs, spot checks and series testing
  • Suitable for almost all metallic and non-metallic material surfaces such as steel, aluminum, brass or plastics (Suitability for plastics must be checked beforehand)
  • The red dye penetrant seeps into cracks by capillary action. The processing time (5 - 10 minutes) depends on the crack / pore geometry.
Characteristics
  • Red oil-based dye penetrant ensures high efficiency
  • Crack detection system is approved according to DIN EN ISO 3452 and meets the requirements of TRGS 614.
  • No additional auxiliaries required for the dye penetrant process
  • Red dye penetrant effectively penetrates the crack by capillary action
  • Exposure time (5 - 10 minutes) varies depending on crack / pore geometry
  • Sensitivity class 2
  • Water and solvent washable for easy cleaning
  • Easy to wash off for clean results
  • Excellent wetting properties, especially on smooth surfaces
  • Strong contrast formation
  • Low sulfur and halogen content according to DIN EN ISO 3452-2 and ASME Code, Section V, Article 6
  • Can be used in a temperature range from -30 °C to +50 °C
  • Quality tested: Sample tested according to DIN EN ISO 3452-2 and 3452-6, approved according to AREVA NP TLV 9017.
  • Size: 500ml
  • Packaging type: aerosol spray

Hazard Warnings (CLP)

Signal word: Danger
Hazard Statements (H-phrases)
  • H304: May be fatal if swallowed and enters airways.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H412: Harmful to aquatic life with long-lasting effects.
Precautionary Statements (P-phrases)
Prevention:
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
Response:
  • P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/...
  • P302 + P352: IF ON SKIN: Wash with plenty of water/soap.
  • P331: Do NOT induce vomiting.
Disposal:
  • P501: Dispose of contents/container to hazardous waste.
Other Hazards
  • No data available.


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

KARL DEUTSCH Prüf- und Messgerätebau GmbH + Co KG, Otto-Hausmann-Ring 101, 42115 Wuppertal, GERMANY, +49 202 7192 0, [email protected], www.karldeutsch.de

No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- - 9901

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 165 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us