Hylomar M Universal seal M 200ml blue

Hylomar M is a non-setting, non-hardening jointing compound in an aerosol spray, based on polyester-urethane, designed for sealing close-fitting metal-to-metal and plastic-to-plastic components.

• Pack size: 200 ml power can
• Also available in: tubes (40 ml, 80 ml), 200 ml spray can, cartridge 300 ml

Applications

• Water & oil pumps; instrument inspection covers; cylinder heads & sumps
• Timing case covers; oil pump joints; gearbox & transmission housings
• Coating pre-formed gaskets; thread sealing
• Weather-proofing motors and outdoor high-voltage circuit breakers

Benefits

• Non-setting & non-hardening; unlimited assembly time and easy disassembly
• Resistant to fuels, oils, coolants, combustion products and gases
• Wide operating temperature: –50 °C to +250 °C
• Low volatility; excellent adhesion; vibration resistant

Technical specifications

Manufacturer number	560002
Colour / form	Blue, thixotropic gel in aerosol
Content	200 ml
Base chemistry	Polyester-urethane (non-setting)
Operating temperature	–50 °C to +250 °C
Flash point (closed cup)	≈ –17 °C
Relative density (20 °C)	≈ 1.03
VOC (content)	≈ 40–50 %

Product description

Hylomar M is a highly engineered, non-setting and non-hardening jointing compound resistant to a wide range of fluids including industrial fuels, oils, petroleum and synthetic diester lubricating oils, gasoline and kerosene, water/glycol and methanol mixtures, air, and turbine & piston engine combustion products. The aerosol “PowerCan” format enables fast, uniform film application on sealing faces and threads, supporting clean assembly and reliable leak-free service life.

Gefahrenhinweise (CLP)

Signal word: Danger.

Hazard statements (H-statements)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H319: Causes serious eye irritation.
• H336: May cause drowsiness or dizziness.

Precautionary statements (P-statements)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.

Response:

• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional EUH statement

• EUH066: Repeated exposure may cause skin dryness or cracking.

 

Information on product safety (Manufacturer, Contact)

HYLOMAR GMBH, Talstraße 106, 41516 Grevenbroich, GERMANY, +49 2182 5708971, [email protected], www.hylomar.com/de