Loctite EA 9492-LI Two Part Epoxy Adhesive high temperature white 50ml

LOCTITE® EA 9492 LI (formerly Hysol® 9492) is a white, low-viscosity 2-part epoxy adhesive for bonding and repairing various materials in high-temperature environments. (Improved safety version of EA 9492)

• Pack size: 50 ml dual cartridge (IDH No. 2344912)
• Also available as: 400 ml dual cartridge

Applications

• Structural bonding of metals, plastics and composites
• Electrically insulating bonds in electronics and device assembly
• Potting and encapsulation of housings, parts and modules
• Repairs under high temperature and chemical exposure
• General industrial applications with high mechanical requirements

Key Features

• Improved safety profile (LI version)
• Very low outgassing
• Temperature resistant up to 150 °C (short-term up to 180 °C)
• Excellent chemical and solvent resistance
• After cure: impact resistant, electrically insulating, resistant to thermal shocks
• Pot life: approx. 10–30 minutes (100 g batch / 22 °C)
• Fixture time: approx. 75 minutes
• Shore hardness: D 85

Technical Data

Directions for Use

• Ensure surfaces are clean, dry and grease-free
• Mix resin and hardener at 2:1 ratio, discard the first 3–5 cm of bead
• Do not mix batches larger than 0.5 kg (risk of heat build-up)
• Keep parts fixed during curing
• Full cure at room temperature, accelerated by heat

Recommended Accessories

• Mixing nozzle: Loctite 1826921
• Manual dispenser: Loctite 96001

Storage & Shelf Life

• Unopened shelf life: 12 months
• Optimal storage: +8 °C to +28 °C, frost-free
• Do not return used material into the original container

Hazard Information (CLP)

Signal Word:

• Part A: Warning
• Part B: Danger

Hazard Statements:

• H315 (Warning): Causes skin irritation.
• H317 (Warning/Danger): May cause allergic skin reactions.
• H319 (Warning): Causes serious eye irritation.
• H411 (Warning): Toxic to aquatic life with long-lasting effects.
• H314 (Danger): Causes severe skin burns and eye damage.
• H330 (Danger): Fatal if inhaled.
• H335 (Danger): May cause respiratory irritation.
• H360F (Danger): May damage fertility.
• H410 (Danger): Very toxic to aquatic life with long-lasting effects.

Supplementary Information:

• Part A: Warning! Spraying may generate dangerous lung-damaging droplets. Do not inhale aerosol or mist.
• Part B: EUH071: Corrosive to the respiratory tract. Only for professional users.

Precautionary Statements:

Prevention:

• P273 (both parts): Avoid release to the environment.
• P280 (both parts): Wear protective gloves.
• Part B: P201: Obtain special instructions before use.
• Part B: P260: Do not breathe vapors.
• Part B: P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response:

• Part A: P302+P352: IF ON SKIN: Wash with plenty of water and soap.
• Part A: P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• Part A: P337+P313: If eye irritation persists: Get medical advice/attention.
• Part B: P303+P361+P353: IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water [or shower].
• Part B: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• Part B: P310: Immediately call a POISON CENTER/doctor.
• Part B: P308+P313: IF exposed or concerned: Get medical advice/attention.
• Part B: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com