Loctite EA 9450 Two Part Epoxy Adhesive clear 50ml catridge

Loctite EA 9450 Two Part Epoxy Adhesive clear 50ml catridge

pics/Loctite/EA 9450/loctite-ea-9450-fast-curing-two-component-epoxy-adhesive-50ml.jpg

€ 26.12 26.12 incl. VAT (21.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

More…

Manufacturer: Henkel

Country of origin: IT/0005

Customs tariff number: 35061000

Weight per piece: 100 g

Recommend this product

Questions about the product

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

seven - four = ?

( Examples: two + three = 5, three - five = -2 )

LOCTITE® EA 9450 (known as Hysol 9450) is a 2-part, translucent, non-sag, multi-purpose, structural bonding epoxy adhesive for general assembly. As a non-sagging paste it is ideal for gap filling and for bonding vertical surfaces to avoid run-off. It provides clear bond lines and is slightly flexible when cured.

Pack size: 50 ml double cartridge (Loctite no. 2036533)

Application

Fast curing at room temperature and suitable for a variety of substrates such as metals, ceramics, glass and most plastics.

Characteristics

Fast-curing and viscous
Good for gap filling
Avoids run-off on vertical surfaces

Technical Information

Chemical basis	Epoxy / Mercaptan (Resin / Hardener)
Color (resin / hardener / mixture)	Translucent white paste / Translucent yellow paste / Translucent paste
Mix ratio (volume / weight)	1:1 / 100:92
Specific Gravity (Density) (resin / hardener)	1.15–1.2 / 1.09–1.16 g/cm³
Viscosity (resin / hardener)	150,000–750,000 / 15,000–75,000 mPa·s (at 25 °C)
Pot life (10 g mass, 25 °C)	2–7 min
Fixture time	approx. 13 min (to 0.1 N/mm² at 22 °C)
Glass transition temperature (Tg)	50 °C (DSC)
Shore hardness	D 70
Lap Shear Strength (Mild steel, grit blasted)	23 N/mm² (after 5 days at 22 °C)

Recommended Accessories

Mixing nozzle: Loctite 984569, Teroson 2900614 (short)
Manual dispenser: Loctite 96001

Hazard pictogram:

Signal word: Warning (Part A) / Danger (Part B)
Hazard statements:

H314 Causes severe skin burns and eye damage. (Part B)
H315 Causes skin irritation. (Part A)
H317 May cause an allergic skin reaction. (Part A and Part B)
H319 Causes serious eye irritation. (Part A)
H411 Toxic to aquatic life with long lasting effects. (Part A)
H412 Harmful to aquatic life with long lasting effects. (Part B)

Precautionary statements:
Prevention:

P273 Avoid release to the environment. (Part A and Part B)
P280 Wear protective gloves/clothing/eye protection/face protection. (Part B)
P280 Wear protective gloves. (Part A)

Response:

P302+P352 IF ON SKIN: Wash with plenty of water and soap. (Part A)
P333+P313 If skin irritation or rash occurs: Get medical advice/attention. (Part A)
P337+P313 If eye irritation persists: Get medical advice/attention. (Part A)
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. (Part B)
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. (Part B)
P310 Immediately call a POISON CENTER/doctor. (Part B)

LOCTITE EA9450, LOCTITE EA-9450

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

loctite-ea-9450-fast-curing-two-component-epoxy-adhesive-datasheet.pdf (73.96 KB)