3M Scotch-Weld EC-9323 Two Part Structural Adhesive 20L kit

3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323 B/A is a two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant  structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP. Once cured it provides extremely high shear and peel strength over a wide temperature range, with outstanding resistance to harsh environments and chemicals commonly encountered in aerospace applications.

• Toughened system providing extremely high shear and peel strength
• Wide service temperature range
• Outstanding environmental resistance
• Full room temperature processing
• Volume: 20 L

Technical Specifications

Hazards Identification (CLP)

Hazard Statements (H-statements)

• Part A: H314 Causes severe skin burns and eye damage.
• Part A: H317 May cause an allergic skin reaction.
• Part B: H315 Causes skin irritation.
• Part B: H319 Causes serious eye irritation.
• Part B: H317 May cause an allergic skin reaction.
• Part B: H411 Toxic to aquatic life with long-lasting effects.

Precautionary Statements (P-statements)

Prevention:

• Part A: P260B Do not breathe dust.
• Part A: P280D Wear protective gloves/protective clothing/eye protection/face protection.
• Part B: P273 Avoid release to the environment.
• Part B: P280E Wear protective gloves.

Response:

• Part A: P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
• Part A: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• Part A: P310 Immediately call a POISON CENTER or doctor/physician.
• Part A: P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
• Part B: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
• Part B: P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
• Part B: P391 Collect spillage.

Additional Labelling (EUH Statements)

None.

Storage and Disposal

• No specific regulations known.

Other Relevant Information

• This material contains no substances identified as PBT or vPvB.
• Part A: Contains 2% components of unknown aquatic toxicity.
• Part B: Contains 18% components of unknown aquatic toxicity.

3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds