Loctite 680 Retaining Compound fluorescent high strength green 250ml

LOCTITE® 680 is a green, high strength, anaerobic-curing retaining compound for the assembly and attachment of cylindrical fitting parts, particularly where low viscosity is required. 
 

• Pack size: 250 ml bottle (Loctite no. 1988189)

Application

• The product prevents loosening and leakage from shock and vibration, and provides robust curing performance by curing on both active metals (e.g. mild steel) and passive substrates (e.g. stainless steel and plated surfaces), as well as slightly oiled or contaminated surfaces, without the need for a primer or cleaner.

Characteristics 

• Low viscosity
• NSF/ANSI 61 certified up to 82°C (179.6°F)
• High strength and robust curing performance on inactive surfaces without primer
• Tolerates minor surface contamination
• Fluorescent under UV for quality control

Technical specifications

Chemical Type	Methacrylate ester
Appearance (uncured)	Green liquid
Fluorescence	Positive under UV light
Viscosity	Medium
Cure	Anaerobic
Strength	High
Fixture time	4 min
Full cure time, @ 22.0 °C	24 hr.
Shear strength, Steel	4000.0 psi
Specific gravity, @ 25.0 °C	1.1

 

---

Hazard Classification

Hazard Class	Hazard Category	Target Organ
Skin irritation	Category 2	Skin
Serious eye damage/eye irritation	Category 1	Eyes
Skin sensitizer	Category 1	Skin
Target Organ Systemic Toxicant - Single exposure	Category 3	Respiratory tract
Acute hazards to the aquatic environment	Category 2	Aquatic ecosystems
Chronic hazards to the aquatic environment	Category 2	Aquatic ecosystems

---

Hazard Information (CLP)

Signal Word: Danger

Hazard Statements

• H315: Causes skin irritation.
• H317: May cause an allergic skin reaction.
• H318: Causes serious eye damage.
• H335: May cause respiratory irritation.
• H411: Toxic to aquatic life with long-lasting effects.

Precautionary Statements

Prevention:

• P261: Avoid breathing mist/vapors.
• P264: Wash hands thoroughly after handling.
• P271: Use only outdoors or in a well-ventilated area.
• P272: Contaminated work clothing should not be allowed out of the workplace.
• P273: Avoid release to the environment.
• P280: Wear protective gloves, eye protection, and face protection.

Response:

• P302+P352: IF ON SKIN: Wash with plenty of water.
• P304+P340+P312: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.
• P305+P351+P338+P315: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing. Get immediate medical advice/attention.
• P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P391: Collect spillage.

Storage:

• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P405: Store locked up.

Disposal:

• P501: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations.

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com