KD-Check FWP-1 Fluorescent Penetrant for finest cracks 500ml spray

KD-Check FWP-1 Fluorescent Penetrant for finest cracks 500ml spray

€ 21.36 21.36 incl. VAT (17.95 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

More…

Manufacturer: Karl Deutsch

Country of origin: DE/0004

Customs tariff number: 38249992

Weight per piece: 500 g

Recommend this product

Questions about the product

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

eight + five = ?

( Examples: two + three = 5, three - five = -2 )

Karl Deutsch KD-Check FWP-1 Penetrant is a highly sensitive testing aerosol spray for the finest cracks in critical components (sensitivity class 2).

Applications

Mainly used with serial testing of critical components, for example in the aerospace and automotive industry
When used in stationary systems, a large number of components can be checked reproducibly for finest cracks within a short period of time
In combination with dry developers, which are applied by spraying or electrostatically, the sensitivity during testing is increased even further

Characteristics

Oil-based Fluorescent Penetrant
Water-washable and solvent-removable
Suitable for ferrous and nonferrous metals (Check suitability for plastics before application)
Reduced test agent consumption due to low viscosity and optimum dripping properties
Excellent wetting properties, especially on smooth surfaces
Very good wash-off properties on rough surfaces
Low background fluorescence
High test reliability due to strong contrast formation
Low sulfur and halogen content according to DIN EN ISO 3452-2 and ASME Code, Section V, Article 6
Can be used in a temperature range from +10 °C to +50 °C
Sample tested according to DIN EN ISO 3452-2
Size: 500ml
Packaging type: aerosol spray

Application notes

Clean parts thoroughly. Ensure parts are free from grease, oil and other pollutants. Defects must be open to the surface. Dry the parts after cleaning. Recommended cleaner: KD-Check PR-1 (Ref. 23201454) or PR-2 (Art. No. 9907).
Apply Penetrant KD-Check FWP-1 to the clean and dry surface and allow to dwell for 5 - 10 minutes.
Remove the excess Penetrant KD-Check FWP-1 from the surface under Black-Light-control, either
a) by rinsing it off with water or
b) by wiping it off with a clean, lint-free cloth, barely dampened with cleaner KD-Check PR-1.
Dry the surface.
Apply a wafer-thin film of Developer KD-Check SD-1 (Ref. 23201455) under Black-Light-control to thedry surface from a distance of about 20 cm. Too much developer may hide fine defects! Soon defects become visible as yellow-green fluorescent lines and development is complete after 5 - 10 minutes. Alternative KD-Ckeck DD-1 dry developer (Art.-No. 9908) may be used.

Technical Specifications

Karl Deutsch Manufacturer Nr.	9904.1
Sensitivity (DIN EN ISO 3452-2)	2 (medium sensitivity)
Density 20°C (DIN 51 757)	0,9 g/cm³
Flash point (DIN 51 755)	93 °C
Viscosity, 20°C (EN ISO 3104)	10,6 mm²/s
Corrosive ingredients (DIN EN ISO 3452)	Halogene (F + Cl): < 20 ppm Sulfur: < 10 ppm
Min. Storage Time	3 years (at room temperature)

Attention

Dangerous substances and/or dangerous goods, see safety data sheet.
Not available in all countries.
Express delivery not possible.

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR,

No files available for download