Total Martol EV 10 CF Food-grade Stamping & Forming Oil 208 L

TotalEnergies MARTOL EV 10 CF is a clear, chlorine-free stamping and forming oil based on mineral oil with a high evaporation rate for light cutting, stamping and forming operations on ferrous metals, aluminium alloys and non-ferrous metals. NSF H1 registered.

• Pack size: 208 L drum (Art. no. 115842)
• Also available: 20 L can

Applications

• Stamping, cutting, pressing and forming
• Materials: ferrous metals, aluminium alloys, non-ferrous metals
• Typical sheet thicknesses: approx. 0.2 mm (Fe) to 0.5 mm (Al)
• Parts/processes where degreasing is not possible/permitted

Features

• NSF H1 registration (No. 1796802) – suitable for incidental food contact
• Very good wetting and creeping ability
• Free of chlorine, sulphur and aromatics; odourless
• No VOC emissions while still evaporating quickly
• Recommended by TotalEnergies, incl. for VALEO

Technical Data

Application Notes

• Use neat; apply by roller, brush, spray or dosing systems.
• Check compatibility with substrates/elastomers; do not mix with other media.
• Adjust process parameters (quantity/extraction) so residues evaporate in a controlled manner.

Hazard Information (CLP)

Hazard Statements (H-codes)

• H304: May be fatal if swallowed and enters airways.

Precautionary Statements (P-codes)

Prevention:

• Not applicable.

Response:

• P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
• P331: Do NOT induce vomiting.

Storage:

• Not applicable.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Other relevant information

• Hazardous ingredients: C11–C12 isoparaffins, <2 % aromatics; C11–C14 hydrocarbons, <2 % aromatics.
• Repeated exposure may cause skin dryness or cracking.

TotalEnergies Marketing Deutschland GmbH, Jean-Monnet-Strasse 2, 10557 Berlin, GERMANY, +49 30 2027 60, [email protected], www.totalenergies.de