Lubricus LUB-KA-MicGB0 400ml Lubricant cartridge with MICROLUBE GB 0

Gruetzner LUBRICUS lubricant cartridge 400 ml, filled with Klüber MICROLUBE GB 0, is a pre-filled lubricant cartridge for long-term lubrication applications.

• Pack size: 400 ml cartridge, type LUB-KA
• Installation note: install without positioning springs

Product description Lubricus 14 System 

Lubricus is an extremely compact lubrication unit for oils and greases up to NLGI class 2. The lubrication system operates either autonomously with a battery pack or with an external power supply (24 VDC). The 400 ml lubricant cartridge is simply screwed onto the drive unit. Lubricus is suitable for the simple and reliable lubrication of bearings, linear guides, chains and open gears. Thanks to its compact dimensions, Lubricus is ideally suited for upgrades or retrofitting and offers a flexible lubrication solution for almost any application.

Klüber MICROLUBE GB 0​

MICROLUBE GB 0 is a specialty grease based on mineral oil. It is highly pressure-resistant, provides excellent wear and corrosion protection, and offers good wettability and water resistance.

Benefits for Your Application

• High-performance universal grease
• High load-carrying capacity
• Excellent wear protection
• Good corrosion protection properties
• Compatible with central lubrication systems

Application Areas
MICROLUBE GB 0 is specifically designed for applications involving high-load friction points and mixed friction conditions. It is used as a universal grease for lubricating eccentric presses (e.g., Müller-Weingarten eccentric presses), highly loaded spur and bevel gears with steel/steel material pairings (e.g., non-oil-tight geared motors), slide and guide rails, as well as sump-lubricated rolling bearings.

Product Data

Structure	Homogeneous
Color	Red
Appearance	Transparent
Density at 20°C	Approx. 0.90 g/cm³
Worked Penetration, DIN ISO 2137, 25°C, Lower Limit	355 x 0.1 mm
Worked Penetration, DIN ISO 2137, 25°C, Upper Limit	385 x 0.1 mm
Base Oil Viscosity at 40°C	Approx. 590 mm²/s
Base Oil Viscosity at 100°C	Approx. 31.5 mm²/s
Shear Viscosity at 25°C	Approx. 3,000 mPas
Drop Point, DIN ISO 2176	> 180 °C
Flow Pressure at -25°C, DIN 51805-2	< 1,400 mbar
FZG Wear Test, DIN ISO 14635, A/2,76/50	>= 12
Minimum Shelf Life (Stored in Dry, Frost-Free Conditions)	36 months

---

Hazard Statements (CLP)

Signal word: Warning.

Hazard Statements (H-Statements)

• H319: Causes serious eye irritation.

Precautionary Statements (P-Statements)

Prevention:

• P264: Wash skin thoroughly after handling.
• P280: Wear eye protection/face protection.

Response:

• P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337 + P313: If eye irritation persists: Get medical advice/attention.

Additional Labelling (EUH-Statements)

• EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.

 

Information on product safety (Manufacturer, Contact)

E.I.S. Euro Industry Supply GmbH & Co. KG, Heilbronner Str. 150, 70191 Stuttgart, GERMANY, +49 (0) 711 460 59 21 40, [email protected], www.euro-industry.com