Castrol Tribol GR SW 460-1 Grease for wind turbines 18kg bucket

Tribol GR SW 460-1 is recommended for tough industrial applications especially as encountered in Wind Turbine Main Bearings, Pitch and Yaw Bearings It gives outstanding bearing protection under high loads at low to moderate speeds and in applications where water resistance is critical. A very important feature is to help to reduce wear from static vibration known as false brinelling and from sliding motion due to axial thrust. These are the most prominent failure modes in Wind Turbine main bearings. Tribol GR SW 460-1 is certified against NLGI High Performance Multiuse grease specification with enhanced Corrosion Resistance, High Load Carrying Capacity and Low Temperature Performance (HPM + CR + HL + LT)

Advantages

• Reduced downtime and maintenance costs because of reduced wear, rust and corrosion.
• Reduced bearing failures on account of better wear control from axial thrust.
• Reduced pitting risk due to low coefficient of friction
• Reduced wear from static vibration (false brinelling)
• Outstanding high and low temperature performance.
• Extended service life with longer intervals between re-lubrication.
• Reduced energy consumption due to low friction coefficient.

Technical specifications

• Color Visual: Yellow
• Appearance Visual: Homogeneous
• Thickner Type: Lithium Complex
• Base Oil Type: Synthetic
• Consistency NLGI Grade: 1
• Base Oil Viscosity @ 40 °C/ 104 °F mm²/s: 460
• Base Oil Viscosity @ 100 °C/ 212 °F mm²/s: 53
• Worked Penetration, 60 strokes @ 25ºC/77ºF 0.1 mm: 310-340
• Worked Penetration (100,000 strokes @ 25°C / 77°F) - change from 60 strokes 0.1 mm: < 30
• Dropping Point °C/°F: >250/>482
• Volume: 18 kg bucket
• Also available in: 400 g cartridge, 5 kg bucket, 180 kg barrel
• GLIS number: 15CD73
• MSDS code: 469396 

Tribol GR SW 460 1, Tribol GR SW460-1