Castrol Molub-Alloy GM 90/220 Gear oil with lubricating solids 20L

Advantages

• Reduced friction, most evident under boundary conditions, is directly attributed to the presence of specially compounded lubricating solids. This benefit is most pronounced where frequent start-up, slow speeds, and high and unexpected loads are encountered.
• The establishment of a protective layer of Molub-Alloy GM solids provides substantial increase in the working life of both parts and lubricant. This increases load bearing area which can reduce unit pressures operating temperatures, and wear.
• Realistic energy savings are possible through a reduction in peak power demand during cold start-up.
• Seal leakage is greatly reduced. Only compatible base oils that control rubber swelling tendencies are used. The Molub-Alloy GM solids lubricate and improve seal contact surfaces.
• Overall savings are derived from the above and result from less labour and downtime, smoother, more efficient operation with longer parts life, and extended lubrication cycles

Technical specifications

• ISO viscosity grade DIN 51519: 220
• SAE viscosity grade DIN 51512: 90
• Density @ 15°C / 59°F kg/m³: 890
• Kinematic Viscosity @ 40°C / 104°F mm²/s: 220
• Kinematic Viscosity @ 100°C / 212°F mm²/s: 19
• Viscosity Index: 96
• Flash Point - open cup method °C/°F: 230/446
• Pour Point °C/°F: -18/0
• Volume: 20l canister
• Also available in: 208l barrel
• GLIS number: 156DF1
• MSDS code:468736