Klüber CENTOPLEX 2 Multi-purpose grease for bearings 1kg can

Klüber CENTOPLEX 2 Multi-purpose grease for bearings 1kg can

€ 55.87 55.87 incl. VAT (46.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: MX/0412

Customs tariff number: 27101999

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

zero + seven = ?

( Examples: two + three = 5, three - five = -2 )

CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap.
They meet the rolling bearing grease requirements according to DIN 51825 K.
Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.
The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.
Temperature range: -30°C to +130°C
Volume: 1 kg can
Also available in: 25kg bucket, 180kg drum

CENTOPLEX 2 and CENTOPLEX 3 are used for rolling and plain bearings. When used for long-term lubrication, temperatures at the friction point should be < 70 °C.
The greases can be used up to their maximum service temperature of 130 °C provided fresh grease is constantly fed to the friction point. We would be pleased to provide more detailed information on relubrication intervals and quantities.
CENTOPLEX 2 and 3 are also suitable for the lubrication of toothed and worm gears, guides and threaded spindles.

CENTOPLEX 2 and 3 can be applied by grease gun, brush or spatula. If a fully-automatic lubrication system is available for relubrication, CENTOPLEX 2 should be used.
For initial lubrication CENTOPLEX 2 or CENTOPLEX 3 can be used depending on the bearing seal.

Chemical composition, type of oil	mineral oil
Chemical composition, thickener	lithium soap
Lower service temperature	-30 °C / -22 °F
Upper service temperature	130 °C / 266 °F
Colour space	brown
Appearance	almost transparent
Texture	homogeneous
Density at 20 °C	approx. 0.90 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 100 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 10 mm²/s
Drop point, DIN ISO 2176, IP 396	>= 190 °C