Klüber Nosol GBY 2 Special synthetic lubricating grease 1kg can

NOSOL GBY 2 Fully synthetic lubricating and sealing grease for fittings

NOSOL GBY 2 is a fully synthetic lubricating and sealing grease for fittings, especially gas fittings and bearings. It is resistant to water, mineral oil, glycol-water mixtures and aliphatic gaseous and liquid hydrocarbons such as city and long-distance gases, natural gases such as natural gases and petroleum gases as well as their replacement gases as well as propane and propane-butane mixtures. Approvals Tested and approved according to DIN 3536: "Lubricant for gas fittings in domestic installations, in gas distribution and gas transport lines",

Characteristics

• Extended component life and surface protection due to good adhesion and good resistance to water
• Improved component performance and extended relubrication intervals due to the good sealing effect and resistance to city, long-distance and natural gases as well as aliphatic hydrocarbons
• Increased versatility of application due to the wide operating temperature range
• Tested and approved according to DIN EN 377 Class B and DIN 3536-10-90

DIN designation:

• Lubricant DIN 3536-10-90 and DIN EN 377 Class B.
• DIN-DVGW registration number: NG-5161BU0518.

Application areas

NOSOL GBY 2 is a special lubricating and sealing grease for fittings, radiator construction, in pumps, drilling and dispensing stations as well as in the refineries, chemicals and automotive industries.

Application instructions

• NOSOL GBY 2 can be applied with a spatula, brush or other common application devices.
• The friction and lubrication points should be as bright as possible, i.e. free of oils, grease, hand sweat and dirt particles.

Product data

NLGI grade, DIN 51818	1
Chemical composition, type of oil	mineral oil
Chemical composition, type of oil	synthetic hydrocarbon oil
Chemical composition, thickener	special lithium soap
Chemical composition	UV additive
Lower service temperature	-40 °C / -40 °F
Upper service temperature	150 °C / 266 °F
Color space	beige
Density at 20 °C	approx. 0.88 g/cm³
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 500 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 40 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	3 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value	5 000 mPas
Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration:  1 week, distilled water	<= 1 corrosion degree
Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C	<= 4 % by weight
Drop point, DIN ISO 2176	>= 250 °C
Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop	<= 0.3 bar
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	<= 1 - 90
Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened  original container, approx.	36 months