Klüberfood NH1 94-52 Special grease for food industry 400g cartridge

Klüberfood NH1 94-52 Fully synthetic multipurpose grease for the food-processing and pharmaceutical industries | N° 096172

As a manufacturer or operator of production or packaging equipment in the food-processing or pharmaceutical industry you are facing ever more challenges, e.g. the requirement to cover several applications with a single lubricant concept.
This often coincides with the implementation of new technologies, rising requirements and the need to select a new lubricant. It is precisely for these requirements that we have developed Klüberfood NH1 94-52 based on a synthetic hydrocarbon oil and a calcium special soap.

• Temperature range: -40°C to +120°C 
• Volume: 400g cartridge
• Also available in: 1kg can, 25kg bucket, 180kg drum

Benefits for your application

• Extended maintenance intervals, e.g. in rolling bearings and linear guides
  • due to high load-carrying capacity and very good wear protection
  • due to very good oxidation resistance
• Excellent adhesion leading to reduced grease consumption
• Particularly good protection of components due to good water resistance
• NSF H1 registered and in compliance with kosher and halal requirements

Applications

• You may use Klüberfood NH1 94-52 as a multipurpose grease, especially for the lubrication of rolling bearings and linear guides. Experience in practice has shown that a multitude of lubricants used in your plant can in fact be replaced by a single product concept: Klüberfood NH1 94-52. 

Application notes

• You may use Klüberfood NH1 94-52 e.g. for the initial lubrication or relubrication of rolling bearings and linear guides. Prior to initial lubrication, we recommend users should verify compatibility with the lubricant.
• Before applying the grease, all lubrication points should be thoroughly cleaned. We recommend conducting an additional risk analysis, e.g. HACCP. Klüberfood NH1 94-52 is applied by spatula, grease gun, grease cartridge or via central lubrication systems. 

Technical specifications

Lower service temperature	-40 °C
Upper service temperature	120 °C
Texture	homogeneous
Colour space	brown
Flow pressure of lubricating greases, DIN 51805, test temperature: -40 °C	<= 1 400 mbar
Density at 20 °C	approx. 0.95 g/cm³
Kinematic viscosity of the base oil 40 °C	ca. 50 mm²/s
Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C	<= 1 - 100 corrosion degree
Drop point, DIN ISO 2176, IP 396	>= 260 °C