Klüber PARALIQ GA 343 Multi-purpose grease for food industry 1kg can

Klüber PARALIQ GA 343 Multi-purpose grease for food industry 1kg can

€ 95.14 95.14 incl. VAT (79.95 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 27101985

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

two - three = ?

( Examples: two + three = 5, three - five = -2 )

PARALIQ GA 343 is a lubricating grease based on paraffinic mineral oil and an aluminium complex soap.
PARALIQ GA 343 is resistant to cold and hot water.
PARALIQ GA 343 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
The use of PARALIQ GA 343 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.
Temperature range: -20°C to +110°C
Volume: 1 kg can
Also available in: 25 kg bucket

Multi-purpose grease for various lubrication points
Less lubricant lost due to good water resistance
Better component protection due to good anticorrosive behaviour, good adhesion due to high consistency
NSF H1-registered for higher process reliability and compliant with halal and kosher requirements
ISO 21469 certified – supports the compliance with the hygienic requirements in your production.

PARALIQ GA 343 is used for many different types of machines and installations in the food-processing and pharmaceutical industries where incidental contact with the food product cannot be excluded.
Applications include the lubrication of rolling and plain bearings, lifting cylinders, joints, guide bars, guide rails, cam discs, seals etc.

Before applying PARALIQ GA 343, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.
If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during re-lubrication.

NLGI grade, DIN 51818	2
Chemical composition, type of oil	paraffinic mineral oil
Chemical composition, thickener	aluminium complex soap
Lower service temperature	-20 °C / -4 °F
Upper service temperature	110 °C / 230 °F
Colour space	yellow
Texture	homogeneous
Density at 20 °C	approx. 0.90 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	8 000 mPas
Drop point, DIN ISO 2176, IP 396	>= 220 °C