Klüber CENTOPLEX 24 DL Low-temperature grease for bearings 1kg can

Klüber CENTOPLEX 24 DL Low-temperature grease for bearings 1kg can

€ 70.15 70.15 incl. VAT (58.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 27101999

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

eight - zero = ?

( Examples: two + three = 5, three - five = -2 )

CENTOPLEX 24 DL is a low-temperature grease based on mineral oils with good oxidation resistance and a lithium calcium soap.
The product's good mechanical stability enables long-term lubrication at normal temperatures and loads.
Volume: 1 kg can
Also available in: 25kg bucket

CENTOPLEX 24 DL can be used as a low-temperature grease in many different plain and rolling bearing applications as well as in lubrication points with low torques and/or high rotational speeds.
CENTOPLEX 24 DL has proven successful in the lubrication of door handles and locking mechanisms in motor vehicles, windshield wipers and small gears.
For long-term lubrication, temperature at the friction point should be < 70 °C. We will be pleased to advise you on relubrication intervals and quantities.

CENTOPLEX 24 DL can be applied by grease gun, brush or spatula. Pumpability via centralised lubricating systems should be checked with the system manufacturer prior to use. The friction point can be cleaned using commercial cleaning agents.

Article number	020008
Composition, thickener	lithium-calcium soap
Composition, type of oil	mineral oil
Colour space	brown
Service temperature, lower limit	-35 °C
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	280 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	310 0.1 mm
Copper corrosion, DIN 51811, 24 h, 80°C	1 - 80 - 24 corrosion degree
Oil separation, DIN 51817 N, 168 h, 40°C	≤ 6 % by weight
Flow pressure, DIN 51805-2, -45°C	≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	≥ 170 °C
Water resistance, DIN 51807-1, 3 h, 40°C	≤ 1 - 40 rating