Klüberpaste HEL 46-450 High temperature paste 750g can

Klüberpaste HEL 46-450 High temperature paste 750g can

€ 130.84 130.84 incl. VAT (109.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: BE/0017

Customs tariff number: 34039900

Weight per piece: 900 g

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

seven + five = ?

( Examples: two + three = 5, three - five = -2 )

Klüberpaste HEL 46-450 is a black hot screw paste for high-alloy steels. It contains fully synthetic polyalkylene glycol and ester base oils and a combination of inorganic solid lubricants.
Klüberpaste HEL 46-450 is suitable for a temperature range between -40 °C and 1000 °C. In the normal temperature range (i.e. below 200 °C) it shows good anticorrosion behaviour and good water resistance. Above 200 °C it acts as a dry lubricant.
Temperature range: -40°C to +1000°C
Volume: Can 750 g
Also available in: Tube 70 g, Cartridge 600 g, Bucket 30 kg

Screw paste for conventional and high-alloy steels (Cr-Ni steels) up to 1000 °C.
Lubricating and assembly paste for connections in hot air ducts (e.g. automotive exhaust systems).
For connecting elements in turbochargers and compressors.

It is important to clean and degrease the contact surfaces thoroughly before applying Klüberpaste HEL 46-450.
A thin layer of paste is then applied by brush, leather cloth or plastic sponge.
Klüberpaste HEL 46-450 spreads easily over the entire surface and thus prevents excess lubrication.

Lower service temperature	-40 °C / -40 °F
Upper service temperature	1000 °C
Colour space	black
Density at 20 °C	approx. 1.43 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	325 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	340 x 0.1 mm
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C	<= 600 mbar
Drop point, DIN ISO 2176, IP 396	>= 250 °C
Four-ball tester, welding load, DIN 51350 pt. 04	>= 5 000 N