Perma FUTURA 120 Lubricant dispenser with high performance oil SO14

Perma FUTURA 120 Lubricant dispenser with SO14 | N° 107083

Perma High performance oil SO14 

• High-temperature chain oil
• Efficient lubrication even at high operating temperatures
• Good regeneration effect on used oil
• Favorable viscosity-temperature properties for safe cold starts
• Outstanding penetration properties for rapid formation of the lubricating film
• Good adhesion, no throwing off
• Resistance to wear and pressure
• Little residue owing to fully synthetic constituents
• Efficient against the settling of finishing and softening compounds and their condensates at the point of friction

Technical specifications

• Chemical composition, type of oil: ester oil
• Chemical composition, type of oil: synthetic hydrocarbon oil
• Upper service temperature: 250 °C / 482 °F
• Appearance: clear
• Density, DIN 51757, 20 °C: approx. 0.95 g/cm³
• Colour space: green
• Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus: >= 220 °C
• Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 28 mm²/s
• Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 320 mm²/s
• Viscosity index, DIN ISO 2909: >= 110

Applications

• Perma High performance oil SO14 is suitable for all oil-lubricated tenter chains such as roller chains, chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways), and slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer tenters, tier tenters, festoon driers and steamers as well as installations.

Perma FUTURA Lubricant dispenser 

• Perma FUTURA is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.
• Operates at ambient temperatures between 0 up to +40 °C.
• Perma FUTURA has a corrosion-proof plastic housing which makes it ideal for hygienically clean applications (e. g. food and chemical industry).
• The reliable operating principle is based on an electrochemical reaction.
• The lubrication period is determined by color coded activator screws.
• Depending on your application's requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.
• The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication point
• Quick and easy exchange without special tools