Klüber NONTROP RB 3 DIN E Grease for gas fittings 1kg can

Klüber NONTROP RB 3 DIN E Grease for gas fittings 1kg can

€ 473.86 473.86 incl. VAT (398.20 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Klüber

Country of origin: BE/0017

Customs tariff number: 34031980

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

five + six = ?

( Examples: two + three = 5, three - five = -2 )

NONTROP RB 3 DIN E is a thermally stable lubricating, sliding and sealing agent based on mineral oil and thickened with a thermally very stable silicate and solid lubricant.
Temperature range: -10°C to +140°C
Volume: Can 1 kg
Also available in: Bucket 25 kg

Tested and approved by DVGW acc. to DIN EN 377 class D
Very good and durable wetting of friction points
Neutral towards copper and its alloys
High thermal stability
Neutral towards DIN EN 377 elastomers, e.g. SRE-NBR 1
Contains solid lubricant to compensate for roughness peaks and areas subject to elevated load

NONTROP RB 3 DIN E is used as lubricant, sliding and sealing agent in gas equipment of all categories including the additional fittings contained in them or intended to be fitted in them which can come into contact with fuel gases.
Such fittings include ball, taper plug and other valves in cooking and heating installations, etc., with an operating temperature from 0 °C to 140 °C

Carefully clean and degrease the friction points prior to initial lubrication. Then apply a thin and uniform layer of NONTROP RB 3 DIN E by means of brush, spatula or suitable metering system to all friction points of the component.

Chemical composition, solid lubricant	solid lubricant
Chemical composition, solid lubricant	silicate
Chemical composition, type of oil	mineral oil
Colour space	black
Texture	homogeneous
Density at 20 °C	approx. 1.10 g/cm³
Drop point, DIN ISO 2176, IP 396	>= 240 °C
Copper corrosion, DIN 51811, (lubricating grease), 24h/140°C	<= 2 - 140 corrosion degree
Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30 h/100 °C	<= 1 % by weight
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	11 500 mPas
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	7 500 mPas
Lower service temperature	-10 °C / 14 °F
Upper service temperature	140 °C / 284 °F