Klüber Unisilkon LCA 3801 Special grease for drinking water valves 1kg

Klüber Unisilkon LCA 3801 Special grease for drinking water valves 1kg

€ 535.44 535.44 incl. VAT (449.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

three - eight = ?

( Examples: two + three = 5, three - five = -2 )

UNISILKON LCA 3801 is a special lubricating grease neutral in odour and taste and based on silicone oil and a calcium soap. It has been developed primarily for valves and fittings as well as sanitary applications. UNISILKON LCA 3801 provides effective wetting even in narrow lubricating gaps and friction points that are difficult to reach.
Uniform operational smoothness is achieved with cold or hot water as the viscosity is not strongly influenced by changing temperatures, e.g. in single-lever mixers with specific surface pressures up to approx. 4 N/mm², depending on the design of ceramic cartridges.
UNISILKON LCA 3801 is resistant to many media used in the beverage industry and to acid or alkaline disinfectants but not resistant to most organic solvents and strong acids or lyes.
Temperature range: -40°C to +140°C
Pack size: 1 kg can
Also available in: 400 g cartridge, 25 kg bucket

For all types of material combinations like ceramics/ceramics, metal/plastic or elastomers
With load-bearing areas between 50 and 99.9 %, good wetting behaviour and good adhesion to different material surfaces, the product ensures consistent smooth operation over the entire lifetime of the component
Operating torque nearly constant under changing temperatures, enabling constant smooth operation up to an admissible surface pressure of approx. 4 N/mm²
Very good resistance to both cold and hot water
Good thermal stability even when applied in a thin film ensures a long functional lifetime of ceramic disc cartridges
Good sealing effect and backflow from "lubricant depot"
Compatible with most ceramics, metals, elastomers and plastics
Approved acc. to BWGL-KTW (UBA guideline), NSF/ANSI/CAN 61, ACS (further approvals on request) for use in all friction points exposed to water or in permanent contact with drinking water

UNISILKON LCA 3801 is used in the entire sanitary field for the lubrication of all kinds of ceramic disc cartridges (surface pressure >= 0.4 to 4 N/mm²), ceramic head parts, mixing taps, piston and ball mixers.
It can also be used as a sealing grease and assembly aid for valves and fittings in domestic and heating installations with exposure to cold and hot water or water vapour.

UNISILKON LCA 3801 is neutral towards ceramics, metals, thermoplastics (e.g. ABS, PC) as well as elastomers (e.g. NBR, EPDM, VMQ). Owing to the many different compositions of elastomers and plastics, we recommend checking their compatibility prior to series application.
UNISILKON LCA 3801 can be easily applied by brush, spatula, sponge or by means of special Apply+Lube technology, e.g. tampon printing.

Manufacturer number	0221000037
Composition, thickener	Calcium soap
Composition, type of oil	Silicone oil
Mineral Oils (MOSH/MOAH)	Not intentionally added (impurities cannot be ruled out)
Colour	Space beige
Texture	Fibrous, homogeneous
Service temperature, lower limit, °C	-40
Service temperature, upper limit, °C	140
NSF H1 registration number	146027
Density, Klüber method: PN 024, 20 °C, g/cm³	approx. 0.97
Worked penetration, DIN ISO 2137 / ASTM D217, 25 °C, lower limit, 0.1 mm	295
Worked penetration, DIN ISO 2137 / ASTM D217, 25 °C, upper limit, 0.1 mm	325
Shear viscosity, Klüber method: PN 008@DIN 53019-1, 25 °C, 300 s⁻¹, lower limit, mPa·s	12000
Shear viscosity, Klüber method: PN 008@DIN 53019-1, 25 °C, 300 s⁻¹, upper limit, mPa·s	20000
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 53000-1 / ASTM D445 / ASTM D7042, 25 °C, mm²/s	approx. 5000
Copper corrosion, DIN 51811, 5 h, 100 °C	1 - 100 - 5 corrosion degree
Water resistance, DIN 51807-1, 3 h, 90 °C	0 - 90 rating
Minimum shelf life, dry, frost-free, unopened container, months	approx. 36

Klüber Unisilkon LCA3801, Klüber Unisilkon LCA-3801

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com