Klüber POLYLUB GLY 801 Special synthetic lubricating grease 1kg

Klüber POLYLUB GLY 801 Special synthetic lubricating grease 1kg

€ 237.94 237.94 incl. VAT (199.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

zero - one = ?

( Examples: two + three = 5, three - five = -2 )

Special synthetic lubricating greases for a wide application range

The product series POLYLUB GLY 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic.
The lubrication of plastics is special in a number of ways. As the behaviour of metals and plastics differs in many aspects, the lubricants' properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB GLY 801, Klüber Lubrication offers products which are free of solid lubricants, and offer good adhesion.
Content: 1kg can
Available in 400g cartridget, 1kg can, 25kg bucket

Benefits for your application

For many applications in connection with various plastics and elastomers
Approved by many renowned manufacturers and suppliers in the automotive industry, e.g. DBL 6827.60, VW TL 52147, Ford WSD-M1 C244-A, Brose Fettgruppe 11 and many more
The integrated UV indicator allows a reliable lubricant detection (wave length 366 nm) even with minimum quantity lubrication
Contributes to mechanical damping and noise reduction of switches and contacts.

Application

Vehicles: Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals.
Plain bearings: Many types of plain bearing designs. POLYLUB GLY 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form.
Gears: Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds.
Pneumatic installations: Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C).
Seals: Lubricating and sealing grease for various types of seals. The POLYLUB GLY and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Application notes

Product data

NLGI grade, DIN 51818	1
Chemical composition, type of oil	mineral oil
Chemical composition, type of oil	synthetic hydrocarbon oil
Chemical composition, thickener	special lithium soap
Chemical composition	UV additive
Lower service temperature	-40 °C / -40 °F
Upper service temperature	130 °C / 266 °F
Color space	beige
Density at 20 °C	approx. 0.88 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	310 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	340 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 730 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 60 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value	8 000 mPas
Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C	<= 4 % by weight
Drop point, DIN ISO 2176	>= 250 °C
Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop	<= 0.3 bar
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	<= 1 - 90
Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx.	36 months