Klüberfood NHT1 1-18 Heat transfer oil for food industry 20L

Klüberfood NHT1 1-18 Heat transfer oil for food industry 20L

€ 940.04 940.04 incl. VAT (789.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 20.0 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

zero - four = ?

( Examples: two + three = 5, three - five = -2 )

Klüberfood NHT1 1-18 is based on highly refined hydrocarbons avoiding impurities that can occur in mineral oils. These impurities can initiate degradation of the oil and form carbon buildup on heater surfaces. Therefore the high purification level increases thermal stability and reduces fouling of the oil. As a consequence Klüberfood NHT1 1-18 allows you to reduce maintenance activities and extended oil change intervals can be achieved.
The low base oil viscosity of Klüberfood NHT1 1-18 enables fast startups of your heating systems. In addition, its low viscosity and high density make Klüberfood NHT1 1-18 a highly efficient heat transfer fluid.
Temperature range: -3°C to +330°C
Volume: 20 l canister
Also available in: 200 l barrel

High process reliability due to NSF HT1 and NSF H1 registration as well as ISO 21469 certification
Extended oil change intervals achievable due to highly refined napthenic base oil
Reduced maintenance efforts and dependable operation due to excellent thermal stability
Increased heat transfer efficiency
Fast startups possible due to low base oil viscosity

Klüberfood NHT1 1-18 is exclusively recommended as a closed-loop heat transfer fluid. Thanks to its NSF HT1 registration, Klüberfood NHT1 1-18 is suitable for use as heat transfer fluid in the food and pharmaceutical industries. It can also be applied in various industries such as textiles, chemicals, automotive, asphalt, cement, wood, etc.

Klüberfood NHT1 1-18 can be applied in new systems without prior cleaning, except when required for reasons of product quality. Residues of varnishes, oils and others from the system installation are usually not enough to affect the fluid lifetime. Klüberfood NHT1 1-18 is compatible with common heat transfer fluids.
The start-up procedure or cleaning process should be done in compliance with the documentation of the manufacturer of the heat transfer system. In the presence of inert gas, the operating time of this fluid may be considerably extended.

Article number	0290980766
Composition, type of oil	hydrated naphthenic mineral oil
Maximum film temperature	342 °C
Minimum Operating Temperature, 20 mPas	36 °C
Minimum Start-up Temperature, 300 mPas	-3 °C
Service temperature, upper limit, fired heaters	315 °C
Service temperature, upper limit, others heaters	330 °C
NSF H1, HT1 registration number	156393
Density, DIN 51757, 15.6°C	approx. 0.89 g/cm³
Flash point, DIN EN ISO 2719, Pensky-Martens closed cup	≥ 149 °C
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 20 mm²/s

Klüberfood NHT1 1 18, Klüberfood NHT 1 1-18