Klüber Summit SH 68 Synthetic air compressor oil 20l canister

Klüber Summit SH 68 Synthetic air compressor oil 20l canister

€ 948.88 948.88 incl. VAT (797.38 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34039900

Weight per piece: 18.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

zero + nine = ?

( Examples: two + three = 5, three - five = -2 )

Klüber Summit SH oils are air compressor oils based on synthetic hydrocarbon and additives.
They can be mixed with mineral oils and synthetic hydrocarbon oils, however are not miscible with polyglycol oils.
Pack sizes: canister 20 l

Low maintenance and operating costs due to extended oil change intervals up to 10,000 operating hours in oilinjected screw-type compressors
Easy compressor oil conversion due to neutral behaviour of oils towards seals
Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
Longer servie life of the oil filters, activated carbon filters and oil separators
Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and
separator life
Reduction of energy costs due to more energy efficient operation

Klüber Summit SH oils have been designed especially for the lubrication of highly loaded, oil-injected screw-type compressors with oil change intervals up to 10,000 operating hours.
Klüber Summit SH oils can also be used for compressors that were previously run with mineral oils.
They are neutral towards most elastomer seals used in air compressors, therefore leakage is not to be expected.

When selecting the oil viscosity for air compressors please observe the manufacturers' instructions. When switching a used compressor to a Klüber Summit SH oil, drain old oil from whole circuit of compressor while still warm.
We also recommend changing all oil filters and separators. Then refill the compressor with Klüber Summit SH oil.

Appearance	clear
Density, DIN 51757, 20 °C	approx. 0.86 g/cm³
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 68 mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 9.8 mm²/s
Viscosity index, DIN ISO 2909	>= 115
Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus	>= 240 °C
Pour point, DIN ISO 3016	<= -36 °C