Klüber Summit PGS 68 Synthetic gas compressor oil 20l canister

Klüber Summit PGS 68 Synthetic gas compressor oil 20l canister

€ 1011.44 1,011.44 incl. VAT (849.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34039900

Weight per piece: 21.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

one + four = ?

( Examples: two + three = 5, three - five = -2 )

Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives.
In high-pressure piston compressors for natural gas or hydrocarbon process gas, mineral oils are easily absorbed into, and diluted by, the gas stream. By contrast, Klüber Summit PGS compressor oils are extremely resistant to such effects.
Pack sizes: canister 19 l

For the lubrication of piston, screw-type and rotary vane compressors for natural and process gas
Compared with mineral oils, extremely resistant to dilution and absorption by hydrocarbon gases
Klüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)

Klüber Summit PGS compressor oils are suitable for piston, screw-type and rotary vane compressors for natural or process gas.
Klüber Summit PGS-2 is ideal for hydrocarbon gases of densities greater than 1.5 g/cm³ because this product is extremely resistant to dilution and absorption by hydrocarbon gases.

Drain as much of the old compressor oil from the system as possible, making sure that the oil is drained while still warm. Do not forget to drain coolers, separator tanks and all lines. Next, clean or preferably change the filters. Then recharge with the appropriate Klüber Summit PGS compressor oil.

Colour space	yellow
Density, DIN 51757, 20 °C	approx. 1.04 g/ cm³
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042, 40 °C	approx. 68 mm²/ s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042, 100 °C	approx. 14 mm²/ s
Viscosity index, DIN ISO 2909	>= 200
Pour point, DIN ISO 3016	<= -42 °C
Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus	>= 230 °C