Kluebersynth LR 44-21 Low-temp grease for vehicle components 1kg can

Kluebersynth LR 44-21 Low-temp grease for vehicle components 1kg can

€ 273.64 273.64 incl. VAT (229.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 1.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

zero - zero = ?

( Examples: two + three = 5, three - five = -2 )

Klübersynth LR 44-21 is a beige, homogeneous and dynamically light lubricating grease.
A special lithium soap and coordinated synthetic hydrocarbon and mineral oil components form the main ingredients.
Its many years of use have shown that Klübersynth LR 44-21 is aging-resistant, particularly adhesive and largely neutral to plastics and body paints.
Klübersynth LR 44-21 is easy to pump and dose, offers high corrosion protection and good water resistance.
Temperature range: -55°C to +130°C
Volume: Can 1 kg
Also available in: Bucket 25 kg, Bucket 50 kg, Drum 170 kg

Due to its excellent low-temperature characteristics, Klübersynth LR 44-21 is primarily used in motor vehicles, e.g. for sliding guideways in lock, seat adjustment or window liftersystems as well as in small gears, rolling and plain bearings.
Its neutral behavior towards car body paints was established in accordance with VW-TL 745, section 4.4.
Klübersynth LR 44-21 is applied where steel or aluminum move against POM or PA.
The components are protected against wear throughout their service life. The good adhesion of Klübersynth LR 44-21 is important in vertical adjustment.

Article number	020270
Colour space	beige
Texture	homogeneous
Texture	fibrous
Lower service temperature	-55 °C
Upper service temperature	130 °C
NLGI grade, DIN 51818	1
Density at 20 °C	approx. 0.85 g/cm³
Drop point, DIN ISO 2176, IP 396	>= 220 °C
Flow pressure of lubricating greases, DIN 51805, test temperature: -55 °C	<= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	310 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	340 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 24 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 4.6 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months