MOTOREX COOL-CORE READY PLUS Spindle Coolant 50% Ready-to-use 200L

MOTOREX COOL-CORE READY PLUS is a ready-to-use spindle coolant (RTU) for closed-loop motor spindle cooling systems operating under demanding thermal and mechanical conditions. Supplied ready-mixed at 50 % (do not dilute with water).

• Pack size: 200 L drum
• Also available in: 20 L canister, 30 L canister, 60 L drum
• Important: Do not use galvanized components in the cooling system and do not use galvanized mixing/storage containers.
• Cleaning note: 2–3 days before product change, clean the cooling circuit with MOTOREX CS-CLEANER (see dosage below).

Applications

• Closed-loop motor spindle cooling systems (machine tools)
• High-performance spindles with high load and temperature cycles
• Formulated for Step-Tec spindle systems

Features

• Long-term protection via passivating corrosion inhibitors
• Helps prevent electrochemical corrosion; protects aluminium, ferrous and non-ferrous metals
• Protection against cavitation and deposit formation
• Low-maintenance; stable heat transfer even under high load cycles

Technical Data

Commissioning & Maintenance

• Initial commissioning: fill the circuit with drinking water, circulate for ≥10 minutes, then drain completely.
• Routine checks: monitor pH and concentration (observe refractometer factor); target values according to the technical data sheet.
• Topping up: compensate evaporation losses with ready-mix; if concentration reaches the upper limit, adjust back to the reference value by topping up with clean drinking water.
• System cleaning before product change (CS-CLEANER): dosage 3 % of total system volume — examples:
  • at 20 L system volume: 0.6 L CS-CLEANER
  • at 60 L system volume: 1.8 L CS-CLEANER
  • at 200 L system volume: 6.0 L CS-CLEANER
  Recommendation: MOTOREX CS-CLEANER 1 L or 5 L.

Hazard Information (CLP)

Hazard Statements (H-Statements)

• H302: Harmful if swallowed.
• H373: May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements (P-Statements)

Prevention:

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P103: Read instructions carefully and follow them.
• P260: Do not breathe dust/fume/gas/mist/vapors/spray.
• P264: Wash thoroughly after handling.
• P270: Do not eat, drink or smoke when using this product.

Response:

• P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
• P330: Rinse mouth.
• P314: Get medical advice/attention if you feel unwell.

Disposal:

• P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com