MOTOREX COOL-CORE READY PLUS Spindle Coolant 50% Ready-to-use 20L

MOTOREX COOL-CORE READY PLUS Spindle Coolant 50% Ready-to-use 20L

pics/Motorex/eis-copyright/COOL-CORE READY PLUS/motorex-cool-core-ready-plus-coolant-for-spindle-cooling-systems-20l-01.jpg
  • pics/Motorex/eis-copyright/COOL-CORE READY PLUS/motorex-cool-core-ready-plus-coolant-for-spindle-cooling-systems-20l-01.jpg
  • pics/Motorex/eis-copyright/COOL-CORE READY PLUS/motorex-cool-core-ready-plus-coolant-for-spindle-cooling-systems-20l-02.jpg
  • pics/Motorex/eis-copyright/COOL-CORE READY PLUS/motorex-cool-core-ready-plus-coolant-for-spindle-cooling-systems-20l-03.jpg
  • pics/Motorex/eis-copyright/COOL-CORE READY PLUS/motorex-cool-core-ready-plus-coolant-for-spindle-cooling-systems-20l-04.jpg
  • pics/Motorex/motorex-logo2.jpg

249.84 249.84 incl. VAT (209.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Motorex

Country of origin: CH/0039

Customs tariff number: 27101991

Weight per piece: 22.5 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

MOTOREX COOL-CORE READY PLUS is a ready-to-use spindle coolant (RTU) for closed-loop motor spindle cooling systems operating under demanding thermal and mechanical conditions. Supplied ready-mixed at 50 % (do not dilute with water).

  • Pack size: 20 L canister
  • Also available in: 30 L canister, 60 L drum, 200 L drum
  • Important: Do not use galvanized components in the cooling system and do not use galvanized mixing/storage containers.
  • Cleaning note: 2–3 days before product change, clean the cooling circuit with MOTOREX CS-CLEANER (see dosage below).
Applications
  • Closed-loop motor spindle cooling systems (machine tools)
  • High-performance spindles with high load and temperature cycles
  • Formulated for Step-Tec spindle systems
Features
  • Long-term protection via passivating corrosion inhibitors
  • Helps prevent electrochemical corrosion; protects aluminium, ferrous and non-ferrous metals
  • Protection against cavitation and deposit formation
  • Low-maintenance; stable heat transfer even under high load cycles
Technical Data
Manufacturer no.309729 (old number 305602)
Colourpink
Density (20 °C)1.070 g/cm³
Viscosity (40 °C, DIN 51562-1)1.2 mm²/s
pH (DIN 51785)8.0–8.6
Refractometer reading31–37
Refractometer factor1.6
Freezing point−38 °C
In-use concentration50–60 % (RTU: 50 %)
Shelf life / storage48 months from production date at 5–35 °C (sealed)
Commissioning & Maintenance
  • Initial commissioning: fill the circuit with drinking water, circulate for ≥10 minutes, then drain completely.
  • Routine checks: monitor pH and concentration (observe refractometer factor); target values according to the technical data sheet.
  • Topping up: compensate evaporation losses with ready-mix; if concentration reaches the upper limit, adjust back to the reference value by topping up with clean drinking water.
  • System cleaning before product change (CS-CLEANER): dosage 3 % of total system volume — examples:
    • at 20 L system volume: 0.6 L CS-CLEANER
    • at 60 L system volume: 1.8 L CS-CLEANER
    • at 200 L system volume: 6.0 L CS-CLEANER
    Recommendation: MOTOREX CS-CLEANER 1 L or 5 L.

Hazard Information (CLP)

Signal word: Warning
Hazard Statements (H-Statements)
  • H302: Harmful if swallowed.
  • H373: May cause damage to organs through prolonged or repeated exposure.
Precautionary Statements (P-Statements)
Prevention:
  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P103: Read instructions carefully and follow them.
  • P260: Do not breathe dust/fume/gas/mist/vapors/spray.
  • P264: Wash thoroughly after handling.
  • P270: Do not eat, drink or smoke when using this product.
Response:
  • P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
  • P330: Rinse mouth.
  • P314: Get medical advice/attention if you feel unwell.
Disposal:
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
EAN Old 25L container : 7611197123545

 

Information on product safety (Manufacturer, Contact)

MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com

Property GTIN/EAN MPN (Manufacturer Part Number)
- 7611197003687 309729

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 171 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us