Anderol 755 Synthetic Compressor Oil 20L

Anderol® 755 Synthetic Compressor Oil
Anderol® 755 is a diester-based synthetic compressor oil according to ISO 150, specifically designed for long-term lubrication of air and process gas compressors. This product offers outstanding performance in syringe and piston compressors.

Anderol® 755 meets or exceeds the following specifications:

• DIN 51506-VDL
• ISO 6743-3 L-DVC

Applications

• Compressors

Benefits

• No interference with catalytic processes by metallic additives.
• Fewer oil changes.
• Reduction in maintenance.
• Significant reduction in the risk of fire and explosion.
• Fast separation of condensate.
• Lower oil consumption.
• No varnish formation and deposits.
• Reduction in energy consumption.

Compatibility

The following sealants, varnishes and plastics are recommended when in contact with Anderol® synthetic lubricants. Non-recommended materials are also listed. For more information on other materials, please refer to our "Compatibility Guide".

RECOMMENDED:
Viton, High Nitrile Buna N, Teflon, Epoxy Lacquer, Oil Resistant Alkyd, Nylon, Delrin, Celcon, PBT

NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Lacquer, Varnish, Polystyrene, PVC, ABS

Application
In the presence of the following gases:

• Air
• Butadiene
• Carbon Monoxide
• Carbon Dioxide (dry)
• Ethylene
• Helium
• Hydrogen
• Natural Gas
• Methane
• Nitrogen
• Propane

Cylinder and crankcase lubricant for reciprocating compressors, vane compressors and vacuum pumps.

Rated operating range -15 to 230°C.

Technical data*
Property Anderol® 755

• ISO VG 150
• Appearance at 20°C Clear yellow liquid
• Viscosity at 40°C, cSt 136.3
• Viscosity at 100°C, cSt 12.6
• Viscosity index 81
• Density at 15°C, kg/l 0.964
• Neutralization number, mg KOH/g 0.05
• Flash point, °C 264
• Pour point, °C -39
• Demulsification at 82°C, min 10
• Sulfate ash 0.011
• Air separation, min 3.2
• %CRC of 20% dest 0.098