Castrol Molub-Alloy TF Spray MoS2 Dry Film Lubricant 400ml

Castrol Molub-Alloy TF Spray (formerly Castrol Opticoating TF Spray) is a grey/black MoS₂-based dry film lubricant. 

• Pack size: 400 ml aerosol can

Applications

• Lubrication and wear reduction on sliding surfaces, gear teeth, spindles, machine beds and guides made of ferrous or non-ferrous metals (not for white metals)
• Economical for difficult-to-access points such as bores, threads, ring gears and adjustment spindles
• Suitable as a priming lubricant to reduce wear and stick-slip
• Dry film is not affected by dust or aggressive atmospheres

Features

• Sprayable – easy application, also for hard-to-reach areas
• Excellent adhesion to metal surfaces
• Dry lubricating film – does not bind dust
• Very low coefficient of friction: μ approx. 0.04
• Extremely high pressure load capacity; reliable wear protection

Operating temperature range

• With air access: -180 °C to +450 °C
• Without air access: -180 °C to +650 °C
• Under protective gas: -180 °C to +1300 °C

International specifications

• VTL 6810-015 (Germany)
• AIR 4223 (France)
• DEF 2304 (UK)
• MIL-M 7866B (USA)
• NATO specification: S 740

Technical data

Application notes

• Clean and degrease metal surfaces thoroughly
• Shake can well before use
• Spray a thin, even layer of dry lubricant
• Contains solvent: observe handling requirements for solvent-based products

Note: The product name was changed in 2015. The former name was Castrol Opticoating TF Spray.

Hazard Information (CLP)

Hazard statements (H-phrases)

• H222: Extremely flammable aerosol.
• H229: Pressurised container: may burst if heated.
• H315: Causes skin irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Safety advice (P-statements)

Prevention:

• P280: Wear protective gloves.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust or mist.
• P273: Avoid release to the environment.
• P264: Wash hands thoroughly after handling.

Response:

• P391: Collect spillage.
• P304+P312: IF INHALED: If you feel unwell, call a POISON CENTER or doctor.
• P362+P364: Take off contaminated clothing and wash it before reuse.
• P302+P352: IF ON SKIN: Wash with plenty of water and soap.

Storage:

• P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Disposal:

• P501: Dispose of contents/container in accordance with local, regional, national and international regulations.

Other relevant information

• Hazardous ingredients: Hydrocarbons C6–C7, n-alkanes, isoalkanes, cyclic, aromatics < 5 % n-hexane.
• PBT/vPvB: Not applicable.
• No special packaging requirements.

BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, [email protected], www.bp.com