Molykote P-40 (S) Metal-free Assembly and Lubricating Paste 25kg

MOLYKOTE® P-40 (S) Paste (formerly MOLYKOTE® P-40 Paste V1) is a metal-free, highly adhesive assembly and lubricating paste for assembly work and the continuous lubrication of mechanical components.

• Pack size: 25 kg pail
• Also available in: 1 kg can, 5 kg pail and 180 kg drum

Applications

• Assembly and threaded connections
• Spline shafts
• Mounting of rolling and plain bearings
• Brake rods, guide pins and other components in brake systems
• Axles of commercial vehicles
• Cams and plain bearings
• Open gears
• Marine applications and areas exposed to splash water or high humidity

Features

• Metal-free assembly and lubricating paste
• Excellent adhesion to lubricating surfaces
• Good corrosion protection
• Good water resistance
• Good protection against fretting corrosion and fretting
• Suitable for assembly work and continuous lubrication
• No intentionally added polytetrafluoroethylene (PTFE) or PFAS
• Fully compatible with the previous MOLYKOTE® P-40 Paste V1
• Sales specification properties remain unchanged compared with the previous product, according to the manufacturer

Technical Data

* The stated values are typical product properties and are not intended for use in preparing specifications. The temperature range of the solid lubricants must not be interpreted as the general service temperature range of the paste.

Application Notes

• Thoroughly clean sliding and contact surfaces before application.
• Apply the paste evenly using a suitable brush, cloth or grease gun.
• Do not mix with other greases or oils.
• Verify the product’s suitability for the intended application under the actual operating conditions.

Storage & Shelf Life

• Store in the original unopened container at temperatures between 0 °C and +40 °C.
• Shelf life: 60 months from the date of manufacture.
• Read the Safety Data Sheet and container label before use.

Common alternative search terms: DuPont MOLYKOTE P-40 (S) Paste, MOLYKOTE P40, MOLYKOTE P-40 V1 Paste, P40/V1 Paste, Molykote 12111955, Molykote 12020321

Hazard Information (CLP)

Signal word: Warning

Hazard Statements (H-Statements)

• H315: Causes skin irritation.
• H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements (P-Statements)

Prevention:

• P264: Wash skin thoroughly after handling.
• P273: Avoid release to the environment.
• P280: Wear protective gloves.

Response:

• P332 + P313: If skin irritation occurs: Get medical advice/attention.
• P362 + P364: Take off contaminated clothing and wash it before reuse.

Disposal:

• P501: Dispose of contents/container at an approved waste disposal facility.

Other Relevant Information

• The following percentage of the mixture consists of ingredient(s) of unknown acute inhalation toxicity: 1.22%.

DuPont de Nemours (Deutschland) GmbH, Hugenottenallee 175, 63263 NEU-ISENBURG, GERMANY, +49 (0) 6102 18 – 0, [email protected], www.dupont.de