Shell Gadus S2 V100 2 EP General Purpose Lithium Grease 400g cartridge

Shell Gadus S2 V100 2 (previously called Shell Alvania Grease RL2) is a general purpose grease based on a new lithium hydroxystearate soap thickener fortified with anti-oxidant, anti-wear and anti-rust additives. It is a medium consistency grease ideal for centralised lubrication systems operating at normal temperatures.

Features

• Reliable high temperature performance - Very good performance up to +130°C, resulting in longer bearing life.
• Good oxidation and mechanical stability - Resists the formation of deposits caused by oxidation at high operating temperatures. Shell Gadus S2 V100 greases are extremely stable under vibrations and give NO LEAKAGE even in repeated shock-loaded bearings.
• Good corrosion resistance characteristics - Effective protection in hostile environments.
• Long storage life - Does not alter in consistency during prolonged storage.

Main Applications

• Rolling element and plain grease lubricated bearings
• Electric motor bearings
• Sealed-for-life bearings
• Water pump bearings
• May be used under a wide range of operating conditions offering very significant advantages over conventional lithium greases at high temperature or in the presence of water.
• A medium consistency grease designed, mainly, for general industrial lubrication.
• Ideal for centralized lubrication systems operating at normal temperatures.

Specifications, Approvals & Recommendations
For a full listing of equipment approvals and recommendations,please consult your local Shell Technical Helpdesk, or the OEMApprovals website

Technical data

Property	Method	Shell Gadus S2 V100 2
NLGI Consistency	-	2
Thickener	-	Lithium-Hydroxystearate
Base Oil Type	-	Mineral Oil
Kinematic Viscosity	IP 71 / ASTM D445 / DIN 51562-1	100
Kinematic Viscosity	IP 71 / ASTM D445 / DIN 51562-1	11
Work Penetration	IP 50 / ASTM D217 / DIN ISO 2137	265-295
Drop Point	IP 396	180

Health, Safety & Environment

• Shell Gadus S2 V100 Grease is unlikely to present any significant health or safety hazard when properly used in there commended application and good standards of personal hygiene are maintained.
• Avoid contact with skin.
• Use impervious gloves with used oil.
• After skin contact, wash immediately with soap and water.
• Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained fromhttp://www.epc.shell.com/Protect the EnvironmentTake used oil to an authorised collection point. 
• Do not discharge into drains, soil or water.

Additional Information
Re-greasing Intervals
For bearings operating near their maximum recommended temperatures, re-greasing intervals should be reviewed.
Advice
Advice on applications not covered here may be obtained from your Shell representative.