Shell Turbo Oil T 46 Steam and gas turbine oil ISO VG 46, 209L drum

Shell Turbo Oil T 46 has been regarded as the industry standard turbine oil (ISO VG 46). Building on this reputation, Shell Turbo Oils T have been developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced anti-wear performance for the gearbox. 

• Pack size: 209 l drum
• Also available in: 20 l bucket

Applications

• Industrial steam turbines & light duty gas turbines requiring no enhanced anti-wear performance for the gearbox
• Hydroelectric turbine lubrication
• Numerous applications where strong control over rust and oxidation is required
• Centrifugal and axial, dynamic turbo-compressors and pumps where an R&O type or turbine oil is recommended

Specifications & Approvals

• DIN 51515-1 L-TD, 51515-2 L-TG, 51524-1 HL
• ISO 8068:2006 - L-TGA, 8068:2006 - L-TSA
• Siemens Power Generation TLV 9013 04 & TLV 9013 05
• Alstom HTGD 90117 V 0001 AA
• Man Turbo SP 079984 D0000 E99
• Fives Cincinnati, LLC (formaly Cincinnati Machine): P-55
• General Electric GEK 28143b, GEK 117064
• Solar ES 9-224Y Class II
• GEC Alsthom NBA P50001A
• JIS K 2213: 2006 Type 2
• ASTM D4304-13 Type I & III
• GB11120, L-TSA and L-TGA
• Indian Standard IS 1012:2002
• Skoda Technical Properties Tp 0010P/97 use in steam engines.
• Alstom Power Hydro Generators (spec HTWT600050)
• Dresser Rand (spec 003-406-001)
• Andritz Hydro
• Siemens Turbo Compressors (spec 800 037 98)
• MAN D&T SE TED 10000494596
• GE Oil and Gas – Appropriate Specification listed under document ITN52220.04
• ANSALDO TGO2-0171-E00000/B
• For special applications such as Ammonia or High Sulphur Syngas compressors with wet gas seals, please contact your local technical expert

Characteristics

• Strong Control of Oxidation
•  High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection

Technical specifications

Manufacturer number	550013827
Viscosity @ 40°C, cSt, ASTM D445	46.0
Viscosity @ 100°C, cSt, ASTM D445	6.90
Viscosity Index, ASTM D2270	105
Colour, ASTM D1500	L 0.5
Density @ 15°C, kg/m³, ASTM D4052	858
Pour Point, °C, maximum, ASTM D97	-27
Flash Point (COC), °C, minimum, ASTM D92	220
Total Acid Number, mg KOH/g, ASTM D974	0.10
Air Release @ 50°C, minutes, ASTM D3427	4
Water Demulsibility, minutes, ASTM D1401	15
Steam Demulsibility, seconds, DIN 51589	153
Rust Control, ASTM D665B	Pass
Oxidation Control Test - TOST Life, hours, ASTM D943	10,000+
Oxidation Control Test - RPVOT, minutes, minimum, ASTM D2272	950

Product description

Shell Turbo Oils T are formulated from high quality hydrotreated base oils and a combination of zinc-free additives that provide excellent oxidative stability, protection against rust & corrosion, low foaming and excellent demulsibility.

Health and Safety

Shell Turbo Oil T 46 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Shell Turbo Oil T46, Shell Turbo Oil T-46

 

Information on product safety (Manufacturer, Contact)

Shell Deutschland Oil GmbH, Suhrenkamp 71-77, 22335 Hamburg, GERMANY, +49 40 6324-6255, [email protected], www.shell.com