Klüberalfa BF 83-102 High temperature and speed bearing grease 1kg can

Klüberalfa BF 83-102 High temperature and speed bearing grease 1kg can

€ 5279.21 5,279.21 incl. VAT (4,436.31 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 1.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

seven - two = ?

( Examples: two + three = 5, three - five = -2 )

Klüberalfa lubricants based on perfluorinated polyether (PFPE) have been developed for specific applications where optimum performance under lifetime lubrication conditions is required.
Klüberalfa BF 83-102 has been designed to ensure long service life of rolling bearings subject to high speeds and very high permanent temperatures.
The calculated speed factor sets new standards in the formulation of high-temperature PFPE greases with PTFE thickeners.
Temperature range: -50°C to +200°C
Volume: 1 kg can

Allows new applications in high-speed bearings lubricated with grease
- due to better thermal stability than conventional high-speed greases
- due to better speed characteristics than conventional PFPE/PTFE high-temperature greases
- due to NSF-H1 registration

Klüberalfa BF 83-102 is suitable, e.g. for fan bearings in turbochargers, small turbines, generator bearings etc.
Even at low temperatures the consistency of Klüberalfa BF 83-102 is low enough for use in low-torque drives.
Klüberalfa BF 83-102 is registered as NSF H1 and complies with FDA 21 CFR § 178.3570.
Compatibility with plastics and elastomers Lubricating greases based on perfluorinated polyether oils (PFPE) are generally regarded as neutral towards standard elastomers and plastics and therefore allow the use of a wide range of different materials in construction (exception: fluorinated rubber).
Nevertheless compatibility with the materials should be tested, especially prior to series application.

For optimum lubrication results, we recommend cleaning the friction point with white spirit 180/210 and then with Klüberalfa XZ 3-1 prior to initial lubrication.
The friction point has to be bright (i.e. free of oil, grease and perspiration) and free of contamination particles.
To optimise service life, please contact our technical sales staff.

Composition, solid lubricant	PTFE
Composition, type of oil	PFPE
Service temperature, lower limit	-50 °C
Service temperature, upper limit	200 °C
NSF H1 registration number	139418
Density, Klüber method: PN 024, 20°C	approx. 1.9 g/cm³
NLGI grade, DIN 51818	2
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 26.5 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 110 mm²/s
Flow pressure, DIN 51805-2, -50°C	≤ 1400 mbar
Speed factor (n x dm)	approx. 1000000 mm/min