Motorex GLYCO GEAR ISO VG 460 Synthetic PG Gear Oil 5L canister

Motorex GLYCO GEAR ISO VG 460 is a fully synthetic industrial gear oil (CLP-PG, ISO VG 460) based on special polyglycols that offer a high level of resistance to ageing, good load-carrying capacity and excellent wear protection. GLYCO GEAR - oils offer a high level of micro-pitting resistance as well as good dirt-dissolving properties and soil-carrying capacity. 

• Pack size: 5 l canister
• Also available in:  20 l canister

Application

• GLYCO GEAR - gear oils are required for spur gears, bevel gears, planetary gears and worm gears that are subjected to extremely high loads.
• Gear oils based on polyglycol are especially suitable for use in gears where a significant amount of sliding occurs during power transmission.

Specifications & Approvals

• DIN 51517-3 CLP-PG
• FLENDER T 7300 A-b (Rev. 16)
• ISO 12925 CKPG, CSPG, CTPG

Characteristics

• Outstanding gearing and storage wear protection
• Increases effectiveness
• Lowers the temperature
• Perfect for use in high and low temperatures
• Excellent viscosity-temperature behaviour
• High resistance to ageing
• Good corrosion protection
• Very good air release

Technical specifications

Manufacturer number	308658
Colour	Yellow
Density at 20 °C, g/cm³, ASTM D4052	1.065
Viscosity at 40 °C, mm²/s, DIN 51562-1	470
Viscosity at 100 °C, mm²/s, DIN 51562-1	79
Viscosity index, DIN ISO 2909	252
Pour point, °C, ASTM D5950	-36
Flash point, Cleveland Open Cup, °C, DIN EN ISO 2592	>290
FZG test, DIN 51354-2, Failure Load Stage	>14

 

Information on product safety (Manufacturer, Contact)

MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, [email protected], www.motorex.com