Last viewed    
sika-primer-206-g-plus-p-moisture-curing-primer-alu-bottle-250ml-ol.jpg

Sika Primer-206-G+P ...

Delo-Duopox 01 Rapid Two-Part Epoxy Adhesive – repair kit 5 x 3g

Delo-Duopox 01 Rapid Two-Part Epoxy Adhesive – repair kit 5 x 3g

pics/DELO/eis-copyright/delo-duopox-01-rapid-universal-2-component-epoxy-adhesive-5-x-3g.jpg
  • pics/DELO/eis-copyright/delo-duopox-01-rapid-universal-2-component-epoxy-adhesive-5-x-3g.jpg
  • pics/DELO/eis-copyright/delo-duopox-01-rapid-universal-2-component-epoxy-adhesive-5-x-3g-eis.jpg
  • pics/DELO/delo-logo.png

10.1 2.02 incl. VAT (1.70 excl. VAT), per piece *

Availability: Available

Packaging unit: 5 boxes

Manufacturer: DELO

Country of origin: DE/0004

Customs tariff number:

Weight per piece: 8 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

DELO-DUOPOX® 01 rapid is a room-temperature curing, unfilled 2-component epoxy adhesive designed for fast structural bonding and emergency repairs.

  • Included per set: 1 × 3 g dual-chamber sachet (resin A + hardener B), 1 × paper mixing palette, 1 × wooden spatula
  • Minimum order quantity: 5 sets (equivalent to 5 × 3 g)
Applications
  • Fast repair & assembly bonding
  • Bonding of plastic, metal & ceramic parts
  • Fine mechanics & electronics assembly
  • Service operations & emergency kits
Features
  • Very fast curing: handling strength after approx. 8 minutes
  • Functional strength after approx. 2 hours – full strength in 24 hours
  • Unfilled: suitable for transparent applications
  • Applied directly from the dual-chamber sachet – ideal for repairs & single-part assembly
  • Temperature resistant from –40 °C to +80 °C (momentarily up to 140 °C)
  • Compliant with RoHS directive (2015/863/EU)
Technical Data
Physical Properties
Chemical baseEpoxy resin, 2-component system
Colour (cured)Yellowish transparent
Density component A / B1.20 / 1.13 g/cm³
Viscosity A / B63 000 / 21 000 mPa·s
Working time (3 g batch)4 minutes
Water absorption (24 h)1.9 wt.-%
Mechanical Properties
Lap shear strength Al/Al (24 h)17 MPa
Lap shear strength Al/Al (100 °C)1.5 MPa
Peel strength Steel/Steel2.6 N/mm
Tensile strength35 MPa
Elongation at break3 %
Young’s modulus1 800 MPa
Shore hardness D40
Thermal Properties
Operating temperature–40 °C to +80 °C
Decomposition temperature200 °C
*Values according to manufacturer’s datasheet at 23 °C/50 % RH – pages 1–2
Curing
  • Handling strength: in approx. 8 minutes at 23 °C
  • Functional strength: in approx. 2 hours
  • Full strength: after 24 hours (RT) or 45 minutes at 80 °C
Application Instructions
  • Open sachet, apply content to paper palette and mix thoroughly with spatula
  • Use mixture within 4 minutes
  • Substrates must be clean, dry and grease-free
Storage & Shelf Life
  • Unopened shelf life: 12 months at +18 to +25 °C
  • Use shortly after opening for best results

Hazard Information (CLP)

Signal word: Warning (Part A & B)
Hazard Statements (H-statements)
  • H315: Causes skin irritation. (Part A)
  • H317: May cause an allergic skin reaction. (Part A)
  • H319: Causes serious eye irritation. (Part A & B)
  • H411: Toxic to aquatic life with long lasting effects. (Part A)
Precautionary Statements (P-statements)
General:
  • P101: If medical advice is needed, have product container or label at hand. (Part A & B)
  • P102: Keep out of reach of children. (Part A & B)
Prevention:
  • P280: Wear protective gloves (e.g. Viton®; nitrile gloves < 15 min for short contact). (Part A)
  • P280: Wear eye or face protection. (Part A & B)
  • P261: Avoid breathing vapour. Use only in well-ventilated areas. (Part A)
Response:
  • P391: Collect spillage. (Part A)
  • P361: Remove contaminated clothing. (Part A)
  • P302 + P352: IF ON SKIN: Wash with water. (Part A)
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. (Part A & B)
  • P337 + P313: If eye irritation persists: Get medical advice/attention. (Part B)
Additional Labeling (EUH-statements)
  • EUH208: Contains epoxy compounds. May cause allergic reactions. (Part A)
Storage and Disposal
  • P501: Dispose of contents/container in accordance with local/regional regulations. (Part A)

 

Information on product safety (Manufacturer, Contact)

DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, [email protected], www.delo.de

Property GTIN/EAN MPN (Manufacturer Part Number)
- - DELO4800110

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 166 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us