Loctite EA 9489 Two Part Epoxy Adhesive slow curing grey 400ml

LOCTITE® EA 9489 (also known as Hysol 9489) is a 2-part, grey epoxy adhesive that is formulated for an extended working life of 60 -120 min, thus allowing more time to adjust parts during assembly. 

• Pack size: 400ml double cartridge (Loctite no. 2056904)
• Also available in: 50ml double cartridge 

Application

This toughened product can also be used for repairing strain gauges, sealing seams on fiberglass components, repairing printed circuit boards, bonding stainless steel inserts, and rubber hose to steel tubing.

Characteristics

• Extended working life
• Toughened
• Medium viscosity
• Flexible bondline

Technical specifications

Manufacturer number	2056904
Chemical Type (Resin)	Epoxy
Chemical Type (Hardener)	Polyamide
Appearance (Resin)	Light beige liquid
Appearance (Hardener)	Grey, opaque liquid
Appearance (Mixture)	Gray liquid
Viscosity	Medium
Components	Two part - Resin & Hardener
Mix Ratio, (by volume) Resin : Hardener	1:1
Mix Ratio, by weight - Resin : Hardener	100:85
Cure	Room temperature cure after mixing
Maximum gap	3.0 mm

 

---

Hazard Statements (CLP)

  

 

Signal Word: Danger (Part A) / Warning (Part B)
Hazard Statements:

• H314 Causes severe skin burns and eye damage (Part B).
• H315 Causes skin irritation (Part A).
• H317 May cause an allergic skin reaction (Part A and B).
• H319 Causes serious eye irritation (Part A).
• H411 Toxic to aquatic life with long-lasting effects (Part A).
  Precautionary Statements:
  Prevention:
• P273 Avoid release to the environment (Part A).
• P280 Wear protective gloves/protective clothing/eye protection/face protection (Part B).
  Response:
• P302+P352 IF ON SKIN: Wash with plenty of water and soap (Part A).
• P333+P313 If skin irritation or rash occurs: Get medical advice/attention (Part A and B).
• P337+P313 If eye irritation persists: Get medical advice/attention (Part A).
• P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water [or shower] (Part B).
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing (Part B).
• P310 Immediately call a POISON CENTER or doctor (Part B).

Loctite EA9489, Loctite EA-9489

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com