3M Scotch-Weld 7260 FC NS Two-part Epoxy Adhesive non-sag black 400ml

3M Scotch-Weld 7260 FC NS Two-part Epoxy Adhesive non-sag black 400ml

€ 90.38 90.38 incl. VAT (75.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

More…

Manufacturer: 3M

Country of origin: FR/0001

Customs tariff number: 39073000

Weight per piece: 700 g

Recommend this product

Questions about the product

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

four - eight = ?

( Examples: two + three = 5, three - five = -2 )

3M™ Scotch-Weld™ 7260 B/A FC-NS is a thixotropic 2-part structural epoxy adhesive designed for high-strength, toughened bonding of metals and composites. Ideal for demanding industrial applications with high temperature and dynamic stress.

Pack size: 400 ml dual cartridge (3M ID 7000080037)

Applications

Structural bonding of steel, aluminium and composites (e.g. SMC, pultruded profiles)
Ideal for applications with thermal loads, vibration or impact
Thixotropic consistency for precise vertical application

Key Features

Toughened formulation with high peel and shear strength – also at elevated temperatures
Excellent resistance to oils, water, cleaners, diesel, etc.
Working time: approx. 90 minutes (20 g mix)
Service temperature: -55 °C to +120 °C (tested up to +200 °C)
Cures at room temperature or accelerated at up to 65 °C

Technical Data

Chemical base	Modified epoxy / modified amine
Consistency	Thixotropic (non-sag)
Colour (base / hardener)	Black / off-white
Density	Base: 1.27–1.35 g/cm³ Hardener: 1.24–1.32 g/cm³
Viscosity (23 °C)	Base: 700–900 Pa·s Hardener: 350–550 Pa·s
Mix ratio	Volume: 2:1 Weight: 100:45
Working time (20 g)	Approx. 90 minutes
Tensile strength (Aluminium, 23 °C)	Approx. 34 MPa (cohesive failure)
Roller peel strength (Aluminium, 23 °C)	Approx. 145 N / 25 mm
Temperature resistance	-55 °C to +120 °C (tested up to +200 °C)
Impact resistance (23 °C)	Up to 40.2 kJ/m² (stainless steel)
Flammability / smoke rating	F1 / M1 according to NF F 16-101 / -102
Shelf life	Min. 24 months at 20 °C in unopened packaging

Application Notes

Clean and mechanically pre-treat substrates (e.g. grinding, MEK, IPA)
Mix components in 2:1 volume ratio thoroughly
Apply with spatula, dispenser or dual-cartridge dispenser
Clamping recommended; cure at room temperature or accelerated with heat
Clean fresh adhesive with ketone-based solvents (e.g. MEK)

Recommended Accessories

Storage & Safety

Store in original packaging at approx. 20 °C and 50 % RH
Refer to Safety Data Sheet (R34, R36/38, R43, R51/53)

3M Scotch-Weld 7260 FC NS, structural adhesive, 2K epoxy, toughened, black, high-temperature, thixotropic

Hazard Information (CLP)

Signal Word: Danger / Warning

Hazard Statements (H-Phrases)

H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H410: Very toxic to aquatic life with long-lasting effects.

Safety Precautions (P-Phrases)

Prevention:

P260A: Do not breathe vapour.
P280D: Wear protective gloves/protective clothing/eye protection/face protection.
P273: Avoid release to the environment.
P280E: Wear protective gloves.

Response:

P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER or doctor/physician.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P391: Collect spillage.

Product Identifier

3,3'-Oxybis(ethylenoxy)bis(propylamine): CAS No. 4246-51-9, EC No. 224-207-2, 15-40%
2-Propennitrile, Polymer with 1,3-Butadiene: CAS No. 68683-29-4, 5-20%
2,4,6-Tris(dimethylaminomethyl)phenol: CAS No. 90-72-2, EC No. 202-013-9, 3-7%
2-Piperazin-1-ylethylamine: CAS No. 140-31-8, EC No. 205-411-0, < 1%
Reaction mass of 2,2'-[Methylenbis(2,1-phenylenoxymethylene)]bis(oxirane): EC No. 701-263-0, 15-40%
4,4'-Methylenediphenyl diglycidyl ether: CAS No. 1675-54-3, EC No. 216-823-5, 10-30%
1,4-Bis[(2,3-epoxypropoxy)methyl]cyclohexane: CAS No. 14228-73-0, EC No. 238-098-4, 5-10%

Other Hazards

This material does not contain substances classified as PBT or vPvB.
Contains 4% components with unknown hazards to aquatic life (Part A).
Contains 26% components with unknown hazards to aquatic life (Part B).

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

Information on product safety (Manufacturer, Contact)

3M Deutschland GmbH, Carl-Schurz-Straße l, 41453 Neuss, Deutschland, 02131-14-2914 / 0, [email protected], www.3m.com/msds

No files available for download

Property	GTIN/EAN	MPN (Manufacturer Part Number)
-	3134375472920	7000080037