Martor 69606.00 TRIMMEX CUTTOGRAF Deburring tool 0.50 mm

A cutting tool that offers you a whole lot of possibilities? MARTOR has plenty of those. Like the TRIMMEX CUTTOGRAF with which you can cut and deburr effortlessly. We have fitted a blade with a rounded-off point in this variant which we recommend for both types of work. Your can adjust the blade extension individually according to the material and the use.

Details

• Easy blade changing: One could also describe it as intuitive. You can push the blade holder right to the front to remove the blade. Put the new one in, replace the holder, ready.
• A wide variety of blades: Count for yourself. There is definitely the right one for you among this unusually large selection of blades. Meaningful and safe: many of the blades can be lowered into the handle.
• Easy and handy: Working comfortably also always depends on the handiness of the tool. That's why the handle of the TRIMMEX CUTTOGRAF is ergonomically shaped. The grooves on the top and at the bottom give you an even better grip when cutting.
• Flexible blade extension: You can decide for yourself, how far the blade should protrude out of the holder. So you can finely adjust the cutting tool time and again after each use.
• Practical eyelet: You do not have to do without an eyelet in the TRIMMEX CUTTOGRAF. You can just pull a strap through it and hang the cutting tool up wherever you need it.

Product information

• Measurements (L x W x H): 145 x 16 x 18 mm
• Weight product: 24.3 g
• Basic material: Glass fibre reinforced plastic

Installed blade      SIMPLEX No. 606      Blade with dull tip Length: 31.00 mm Width: 5.80 mm Material thickness: 0.50 mm

Optional blades 10 12 13 14 15 16 20 34 72 605 629 643 834 677 679 1031 8605 8629

Technical features

                   

Main cutting materials

                   

Accessories