UHU Poly Max POWER Aassembly Glue & Sealant clear 300g cartridge

Poly Max® POWER transparent

Universal, crystal-clear assembly adhesive and sealing compound based on a unique SMP technology, with rapid strength build-up. For bonding, mounting and sealing almost all (construction) materials on nearly all surfaces (smooth, porous and non-porous).

Features

• Crystal-clear
• Very high final strength after only 4 hours
• Very fast strength build-up
• Permanently elastic
• Suitable for interior and exterior use
• Paintable (test first)
• Joint filling
• Temperature resistant between –40 °C and +100 °C
• Waterproof and weather resistant
• 100 % adhesive (does not deform)
• Adheres even to slightly damp surfaces
• Solvent-free
• Adheres well without primer
• Acid-free and odorless

Application Area

Suitable for: Glass, stone, concrete, wood, metals, ceramics, cork, mirrors, etc.
Not suitable for: PE, PP, PTFE, bitumen (always carry out an adhesive test for plastics).

Usage / Application

• Preparation

Apply at temperatures between +5 °C and +40 °C. Surfaces must be firm, clean, dust- and grease-free. Slight moisture is permissible.

• Application / Processing

Cut the cartridge tip above the thread, attach nozzle and cut to desired diameter. Apply adhesive in strips or dots. Position within 10 minutes. Full strength in approx. 4 hours (depending on surface and conditions).

• Cleaning / Storage

Clean tools and fresh residues with mineral spirits. Dried residues must be removed mechanically. Seal the container tightly. Store in a cool, dry, frost-free place.