Klübersynth PEG 46-1200 Special grease for enclosed gear drives 25kg

Klübersynth PEG 46-1200 Special grease for enclosed gear drives 25kg

€ 1276.81 1,276.81 incl. VAT (1,072.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 34039900

Weight per piece: 25.0 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

two + eight = ?

( Examples: two + three = 5, three - five = -2 )

The good wear protection of both the gears and the rolling bearings ensures a long service life of the components
The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures
Much longer service life than mineral oils due the excellent ageing und oxidation stability of the synthetic base oil used in Klübersynth PEG 46 greases: Thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible
The excellent friction behaviour of the polyglycol base oil reduces power losses and improves efficiency

Klübersynth PEG 46 greases were developed especially for the lubrication of spur gears, bevel gears, planetary gears and worm gears with material pairings steel/steel or steel/brass in small enclosed gear drives.
Klübersynth PEG 46 greases can also be used for the lubrication of ball and roller guides, rolling and plain bearings as well as toothed couplings.

Immersion lubrication of gears operating at circumferential speeds up to approx. 10 m/s is possible if NLGI grade 00 is used. Sufficient heat dissipation is essential. Depending on the operating conditions higher circumferential speeds are possible. The dynamic stresses of design elements made of aluminium or aluminium alloys may lead to increased wear. If necessary, wear tests should be carried out.

NLGI grade, DIN 51818	00
Lower service temperature	-50 °C / -58 °F
Upper service temperature	120 °C / 248 °F
Colour space	brown
Texture	homogeneous
Density at 20 °C	approx. 0.99 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	430 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	400 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 120 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 20 mm²/s
Drop point, DIN ISO 2176, IP 396	>= 160 °C